Shuffle Play; Cleaning The Exterior; Handling Cds; Cleaning Cds - RCA RP7994 User Manual

Using The CD Player

Shuffle Play

If pressing this key the track of a CD will
be played in random order. If SHUFFLE is
pressed during stop mode it will start play
in SHUFFLE mode. The LCD will light the
SHUFFLE segment of the display. The
SHUFFLE mode can be switched off by
pressing the SHUFFLE or STOP key. It will
also be switched off by opening the flap.
Using The Radio

Cleaning the Exterior

• Disconnect the system from AC power
before cleaning the exterior of the unit
with a soft dust cloth.

Handling CDs

• Do not touch the signal surfaces. Hold
by the edges, or by one edge and the
hole.
• Do not affix labels or adhesive tape to
the label surfaces. Also, do not scratch
or damage the label.
• Discs rotate at high speeds inside the
player. Do not use damaged (cracked or
warped) discs.

Cleaning CDs

• Dirty discs can cause poor sound quality.
Always keep discs clean by wiping them
gently with a soft cloth from the inner
edge toward the outer perimeter.
• If a disc becomes dirty, wet a soft cloth
in water, wring it out well, wipe the dirt
away gently, and then remove any
water drops with a dry cloth.
• Do not use record cleaning sprays or
antistatic agents on discs. Also, never
clean discs with benzene, thinner, or
other volatile solvents which may cause
damage to the disc surface.
RP7994 EngIB
Repeat
The REPEAT button allows you to repeat
one track or all tracks. To scroll through
the choices, continually press and release
the REPEAT button and check the display
to see which choice you've selected. The
following chart illustrates how REPEAT
works in various modes.
Play Mode:
• Repeat 1 replays current track
• Repeat All replays entire CD
Shuffle Mode:
• Repeat 1 replays current track
• Repeat All replays entire CD in a different
shuffle sequence
Tape Care
• Don't expose tapes to sunlight or store
in hot places. High temperatures may
warp the shell or damage the tape
itself.
• Keep cassettes in their boxes when not
in use.
• Cassette tapes can be erased by
magnetic fields produced by magnets,
electric motors, electrical transformers,
and other devices. Keep tapes away
from magnets and magnetic fields.
Cleaning the Tape Heads
Iron oxide particles from the magnetic
tape can build up on the parts that come
in contact with the tape. These deposits
can cause incomplete erasure, muffled
playback sound, and might prevent
automatic stop.
To clean a cassette deck, open the
compartment door, push the PLAY button
and gently clean the heads, capstan, and
pinch wheel with a head cleaner.
Always unplug the power cord before
cleaning, and allow 30 minutes drying
time when using a liquid cleaner.
Clean heads after every 25 hours of use.
• Demagnetize the head occasionally with
a head demagnetizing cassette
(available from many audio equipment
stores).
• Never use any metal objects on or near
the tape heads.
Do not allow any cleaning material to
fall into the tape assembly.
6 7/12/00, 5:23 PM
EN
5