Power Supply Statement; Cleaning And Maintenance; Glass Parts Notice; Tip-Over Hazard Prevention Notice - Lenovo 10HC User Manual

DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following:
Laser radiation when open. Do not stare into the beam, do not view directly with optical
instruments, and avoid direct exposure to the beam.

Power supply statement

Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no serviceable parts inside these components. If you suspect a problem with one of these parts,
contact a service technician.

Cleaning and maintenance

Keep the computer and workspace clean. Shut down the computer and then disconnect the power
cord before cleaning the computer. Do not spray any liquid detergent directly on the computer or use
any detergent containing flammable material to clean the computer. Spray the detergent on a soft cloth
and then wipe the computer surfaces.

Glass parts notice

CAUTION:
Some parts of your product may be made of glass. This glass could break if the product is dropped
on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove
it. Stop using your product until the glass is replaced by trained service personnel.

Tip-over hazard prevention notice

• Place the computer on a sturdy and low base, or anchor the furniture and position the computer as
far back on the furniture as possible.
• Keep remote controls, toys, and other items that might attract children off the computer.
• Keep the computer, cables, and cords out of the reach of children.
• Supervise children in rooms where these safety tips have not been followed.
© Copyright Lenovo 2015, 2016 vii