Operation - MasterForce 241-0807 Operator's Manual

OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended Use
The machine is intended for dry sanding–with
high removal capacity–of wood, plastic, metal,
filler as well as varnished surfaces.
1. CHANGING HOOK & LOOP SANDPAPER
(SEE FIG. A1)
The sandpaper and sanding plate are provided
with a hook and loop attachment system to
allow quick and easy changing of the sanding
and polishing accessories. Firstly, remove any
dust or other objects from the hook and loop
on the sanding plate and sandpaper. As the
sandpaper has dust extraction holes you must
align these with the holes in the sanding plate,
otherwise the dust extraction will not function.
(See Fig. A1)
Fig. A1
To remove the sandpaper, lift one corner of the
paper and pull off from the sanding plate. (See
Fig. A2)

OPERATION

Fig. A2
2. CYCLONE BOX (SEE FIG. B1)
Your sander is equipped with the cyclone box.
To attach, insert the cyclone box into the back
of the sander until it is secure.
Caution!
To prevent the possibility of sanding dust or
foreign body being thrown in to your face or
eyes, never attempt to use your sander without
the cyclone box properly installed.
Fig. B1
Page 9