Advertisement
Quick Links
Random Orbital Sander
241-0439
OPERATOR'S MANUAL
CAUTION: To Reduce the Risk of Injury, User Must
Read and Understand the Operator's Manual. Save These
Instructions For Future Reference.
For questions / comments, technical assistance or repair parts –
Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MasterForce 241-0439
Summary of Contents for MasterForce 241-0439
- Page 1 Random Orbital Sander 241-0439 OPERATOR’S MANUAL CAUTION: To Reduce the Risk of Injury, User Must Read and Understand the Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Symbols ............Page 2 Safety Instructions . -
Page 3: Safety Symbols
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. Symbol Designation / Explanation Name Volts Voltage... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures. - Page 5 SAFETY INSTRUCTIONS GENERAL POWER TOOL 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the SAFETY WARNINGS power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or WARNING: Read all safety entangled cords increase the risk of electric warnings, instruction, illustrations and shock.
-
Page 6: Specific Safety Warnings
SAFETY INSTRUCTIONS 6. Dress properly. Do not wear loose 6. Keep cutting tools sharp and clean. clothing or jewellery. Keep your hair and Properly maintained cutting tools with clothing away from moving parts. Loose sharp cutting edges are less likely to bind clothes, jewellery or long hair can be and are easier to control. - Page 7 SAFETY INSTRUCTIONS 5. To reduce the risk of electric shock or WARNING: Some dust created by damage to the charger and battery, use power sanding, sawing, grinding, drilling only the batteries and charger listed. and other construction activities contains chemicals known to the state of California Battery pack Charger to cause cancer, birth defects or other...
-
Page 8: Overview/Specifications
OVERVIEW On/off Switch Dust Bag Vacuum Adapter Base Pad SPECIFICATIONS Rated Voltage 20 V d.c. No-load Speed 7000~11000 OPM Orbital Diameter 1/8” (3 mm) Pad Size 5” (125 mm) Weight 2 lb. 11 oz. (1.23 kg) Page 7... -
Page 9: Assembly
ASSEMBLY CONTENTS WARNING: If any part is broken or missing, DO NOT attempt to attach the Random orbital sander, dust bag, 5pcs battery or operate the tool until the broken sanding paper, and instruction manual. or missing part is replaced. Failure to do so could result in possible serious injury. - Page 10 ASSEMBLY TO ATTACH VACUUM ATTACHING THE DUST BAG TO ADAPTOR (FIG. 2) THE ADAPTOR WARNING: Do not use the dust FIG. 2 bag when sanding metal. Using the dust bag when sanding metal creates a fire haz- ard, which could damage the tool and lead to serious personal WARNING: Collected sanding dust...
- Page 11 ASSEMBLY SELECTING THE SANDPAPER NOTICE: From time to time, remove the dust bag from the sander and clean the GRADE dust bag with a dry brush. To remove: • Different grades of sandpaper can be purchased from the store where you 1.
-
Page 12: Operation
OPERATION TURNING THE SANDER ON/OFF 3. Position “1” selects slowest speed; position “6” selects the fastest (FIG. 5) speed. Adjust the speed for optimum To turn on the sander, depress the side of performance. the rocker switch marked “I”. To turn it off, depress the side of the rocker SANDING switch marked “O”. -
Page 13: Before Each Use
MAINTENANCE 6. Always wear safety goggles when WARNING: Always wear safety cleaning tools using compressed air. goggles or safety glasses with side shields during power tool operations, or when LUBRICATION blowing dust. If operation is dusty, also wear a dust mask. All of the bearings in this tool are lubricated with a sufficient amount of high grade WARNING:... -
Page 14: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION The sander does not work. The battery is depleted. Charge the battery. The sander doesn’t collect The dust bag is full. Clean the dust bag. the dust as expected. The sandpaper is not Reattach the sandpaper with properly attached and the the holes properly aligned. -
Page 15: Warranty
Random Orbital Sander Page 14... - Page 16 © 2023 Menard, Inc., Eau Claire, WI 54703 08/2023...
Need help?
Do you have a question about the 241-0439 and is the answer not in the manual?
Questions and answers