Assembly Instructions - Kenmore Elite SSV Quick Clean DS6025 Use & Care Manual

Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list
to verify that you have received all the components of your new Kenmore Elite SSV
QuickClean Cyclonic Multi-Vac.
1. Insert the wand into the hand vacuum
until you hear a click.
2. Insert the motorized nozzle into the wand
until you hear a click.
Click
3. Slide the battery pack along the slots
under the hand vacuum handle into the
vacuum.
4. Use the 2 screws provided to mount the
charging dock on the wall, but not to
drywall only. Secure the screws to a stud.
Mount at a recommended height of 59"
and no less than 44" above the floor.
Ensure that no plumbing or electrical
cables, wires or ductwork are located
directly behind the mounting area.
5. Insert the battery charger base into the
charging dock.

ASSEMBLY INSTRUCTIONS

Click
Click
- 10 -
6. Charge the unit for 3.5 hours before
using the vacuum for the first time.