Makita AN451 Instruction Manual page 8

1
4
1. Contact element
2. Shingle guide
3. Shingle
4. Projection
1
2
1. Adjusting plate
2. Lever
ASSEMBLY
1
2
1. Latch lever
2. Magazine cap
8
Adjusting the shingle guide
005629
The shingle guide is designed for consistent shingle expo-
sure. Place shingle in desired position.
2
Turn the lever clockwise to release the adjusting plate. Reset
the tool on the exposed shingle with the projections of the
contact element depressing the bottom of the previous row of
3
the shingle. Slide the adjusting plate up against the bottom of
the exposed shingle and turn the lever counterclockwise to
lock the adjusting plate.
005630
CAUTION:
• Always disconnect the air hose before carrying out any
work on the tool.
Loading nailer
005626
Select nails suitable for your work. Depress the latch lever
and open the magazine cap.