Safety Instructions; Danger To Life Due To Electric Current; Danger Due To Insufficient Personnel Qualification; Risk Of Burns On Hot Components And Surfaces - oventrop Aktor M Operating Instructions Manual

Hide thumbs Also See for Aktor M:
Table of Contents

Advertisement

Aktor M
Safety-related information
2.3

Safety instructions

We have developed this product in accordance with
current safety requirements.
Observe the following instructions for safe use.
2.3.1

Danger to life due to electric current

!
Make sure that the product can be disconnected
from the power supply at any time.
!
Do not operate the product if there is visible
damage.
During work on the product
!
Disconnect all components from the power
supply at all poles and secure them against being
switched on again.
!
Check that no voltage is present.
2.3.2 Danger due to insufficient personnel
qualification
Work on this product may only be carried out by suitably
qualified specialist tradespeople.
Due to their professional training and experience as well
as knowledge of the relevant legal regulations, qualified
specialist tradespeople are able to carry out work on the
described product in a professional manner.
Operator
The operator must be instructed in the operation by
specialist tradespeople.
2.3.3 Risk of burns on hot components and
surfaces
!
Allow the system to cool down before working
on it.
!
Wear suitable protective clothing to avoid
unprotected contact with hot fittings and system
components.
2.3.4 Risk of injury due to the weight of the
product
!
Always wear safety shoes during installation.
!
If necessary, call in other people for the
installation.
!
If necessary, use a suitable lifting tool.

2.3.5 Risk of injury

Stored energy, angular components, points and corners
can cause injuries.
!
Ensure there is sufficient space before starting
work.
!
Handle open and sharp-edged components with
care.
!
Wear suitable protective clothing.
!
Keep the working area tidy and clean to avoid
sources of accidents.
6
2.3.6 Damage to property due to unsuitable
location
!
Do not install the product in rooms prone to
frost.
!
Do not install the product in wet or damp
environments.
!
Do not install the product in rooms with
corrosion-enhancing ambient air.
!
Ensure that the product is not exposed to strong
sources of electromagnetic radiation.
2.3.7

Availability of the operating instructions

Every person who works with this product must have read
and apply this manual and all applicable instructions.
The instructions must be available at the place of use of
the product.
!
Pass on these instructions and all applicable
instructions to the operator.
115802384-V01.10.2022

Advertisement

Table of Contents
loading

Table of Contents