INSTRUCTIONS FOR THE USER It is necessary that all the operations regarding the installation, adjustment and adaptation to the type of gas available are carried out by authorised personnel, in conformity with the regulations in force. The specific instructions are described in the booklet section intended for the installer.
INSTRUCTIONS FOR THE INSTALLER IMPORTANT NOTICE: THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY AUTHORISED PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN FORCE. THE MANUFAC TURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY WITH SUCH PROVISIONS. THIS APPLIANCE SHALL BE INSTALLED ONLY BY AUTHORISED PERSONS AND IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION INSTRUCTIONS, LOCAL GAS FITTING REGULATIONS, MUNICIPAL BUILDING CODES, ELECTRICAL WIRING REGULATIONS,...
INSTRUCTIONS FOR THE INSTALLER assembly is restrained from accidental contact made according to the table of the "technical with the flue or flue outlet of an underbench oven. characteristics" as enclosed. The hose should not be subjected to abras ion, Act as follows: kinking or permanent deformation and should - remove the racks and burners.
Page 8
TECHNICAL CHARACTERISTIC TABLES TA PE BY NOMINAL NORMAL INJECTOR BURNERS PASS HEAT INPUT PRESSURE DIA METER DIAMETER ( MJ/ h) DESCRIPTION 1/100 mm 1/100 mm Max. Min. Propane LPG 2.75 10.5 2.63 RAPID Natural 1.00 Adjust. 10.5 2.63 Propane LPG 2.75 1.50 SEMI-RAPID...
Need help?
Do you have a question about the CF7GS and is the answer not in the manual?
Questions and answers