Operation - RCA RMW1166 Instruction Manual

OPERATION

1. Power Level
Ten power levels are available.
Level
Power 100%
Display
Remarks: when a power between level 10-8 is chosen, the high level indicator is
lighted and it will flash when in operation.
When a power between level 7-1 is chosen, the low level indicator is
lighted and it will flash when in operation.
2. Clock Setting
When the microwave oven is plugged into a outlet, the oven
will display " 0:00 "
(1) Press " CLOCK/PRE-SET ", LED will display 00:00, clock indicator will be
lighted. The hour figures will flash; ":" and "0" will be lighted.
(2) Press the number keys and enter the correct time. For example,
time is 10:12 now, please press "1,0,1,2" in turn.
(3) Press " AM/PM " to choose AM or PM. AM or PM will be selected in turn
by pressing the button of " AM/PM " continuously.
(4) Press " CLOCK/PRE-SET " to finish clock setting, and the clock indicator will go out. ":"
will be flashing and the clock will be lighted.
(5) If the numbers input are not within the range of 1:00--12:59, the setting will be invalid
until valid numbers are input.
Note: In the process of clock setting, if the " STOP/CLEAR " button is pressed or if there is
no operation within 1 minute, the oven will go back to the former setting automatically.
3. Kitchen Timer
(1) Press " KITCHEN TIMER ", LED will display 00:00, clock indicator will be lighted.
The first "0" will flash; ":" and the other "0" will be lighted.
(2) Press the number keys and enter the correct time.(the maximum cooking time is
99 minutes and 99 seconds)
(3) Press " START/+30SEC. " to confirm setting, clock indicator will be lighted.
(4) When the kitchen time is reached, clock indicator will go out. The buzzer will ring 5 times.
4. Microwave cook
(1) Keep on pressing " POWER " to choose microwave power. "
will be lighted.
(2) Press number keys to input the cooking time; the maximum cooking time is 99
minutes and 99 seconds.
10 9 8
90% 80%
PL10 PL9 PL8
7 6 5
70% 60% 50%
PL7 PL6 PL5
10
4 3 2
40% 30% 20%
PL4 PL3 PL2
" and " " or "
1
10%
PL1
"