Advertisement
Available languages
Table of Contents
OPERATION INSTRUCTIONS
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the correct
time.
3. Touch CLOCK pad again.
NOTE:
· This is a 12-hour cycle clock. When the oven is
first plugged in or when power resumes after
a power interruption, the display will show
ENTER CLOCK TIME. If you prefer not to have
the clock displayed, touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching the
number pads.
3. Touch START/STOP.
NOTE:
The maximum time you can enter is 99
·
minutes and 99 seconds.
Time countdown can be seen in display for 5
·
seconds before clock or cooking time is
returned to display.
Touch TIMER and then touch RESET to cancel
·
TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking time.
You can set a cooking time from one second to
99 minutes and 99 seconds.
2. If you want to set a power level other than
100% power, touch POWER, then use the
number pads to enter the power level. You
can set the power level from 1 to 9.
3. Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad
9
8
7
6
5
4
3
2
1
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking".
DO NOT TOUCH START/STOP.
2. SET STAGE 2:
Touch COOK then enter proper cooking time and
(lower) power level. (Most 2-stage recipes use
lower power for second stage.)
3. Touch START/STOP.
NOTE:
After total time has elapsed, 4 signals
·
sound and END appears in display. Touch
RESET or open oven door to clear END before
starting another cooking function.
SPEED DEFROST
1. Touch SPEED DEFROST.
2. Enter desired defrosting time by touching
correct number pads.
3. Touch START/STOP.
NOTE:
After time has elapsed four signals sound and
·
END appears in display. Touch RESET pad or
open the door to clear END before starting
another cooking function.
After setting SPEED DEFROST, oven can be
·
programmed to automatically switch to
one or two-stage cooking.
7
Cooking power
90%
80%
70%
60%
50%
40%
30%
20%
10%
Advertisement
Chapters
Table of Contents
