RCA RMW1166 Instruction Manual page 17

Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
1) In waiting states, press "MEMORY" twice,stop pressing until the screen displays "2".
2) Press "POWER" three times until "PL8" displays.
3) Press number keys "3","2","0" in order to input the cooking time.
4) Press "MEMORY" to save the setting. Buzzer sounds once then turn back to waiting
states. If you press "START/+30SEC." after the above step, the procedure will be
saved as the memory 2 and operated.
5) If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
need to reset.
6) If you want to run the saved procedure, in waiting states, press "MEMORY" twice, screen
displays "2", then press "START/+30SEC." to run.
19. INQUIRING FUNCTION
(1) In cooking state, press " CLOCK/PRE-SET ", the LED will display clock for three seconds
(2) In the microwave cooking state, press " POWER " to inquire microwave power level, and
the current microwave power will be displayed. After three seconds, the oven will turn
back to the previous state.
20. LOCK FUNCTION FOR CHILDREN
Lock: In waiting state, press " STOP/CLEAR " for 3 seconds, there will be a long "beep"
indicating the child lock has been activated. Meanwhile, LED will display "
Indicating: In locked state, press " STOP/CLEAR " for 3 seconds, there will be a long "beep"
indicating the lock has been released.
21. COOKING END REMINDING FUNCTION
When the cooking time has elapsed, the buzzer will sound 5 "beep" to alert user the cooking
is finished.
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital displays current time, the icon " : " would
flash; otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays remainder cooking time.
16
"