Advertisement
10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain options
such as Two Rinses. These may be turned off, if desired.
NOTE: Not all options are available with all cycles. Touch control
panel to select any other options.
12
11.
Touch and hold START/PAUSE/Unlock Lid
button to begin wash cycle
Press and hold the START/PAUSE/Unlock Lid button to start the
wash cycle. When the cycle has finished, the end of cycle signal
will sound (if set). Promptly remove items when cycle is done
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE/Unlock Lid button to pause washer; the lid
will unlock once the washer movement has stopped. This may
take several minutes if the load was spinning at a high speed.
Then close lid and press and hold the START/PAUSE/Unlock Lid
button again to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes
the water will pump out and F8E6 error code will appear
on the display.
Advertisement
