EK-Quantum Vector2 Trio RTX 4080 D-RGB User Manual page 11

M2.5 x 4 AX1 SCREW + M2.5 NUT
STEP 2
Use seven (7) M2.5 x 4 AX1 Screws and PVC washers to tighten
the PCB on the water block. Tighten the screws evenly using the
Phillips-head screwdriver. EK recommends you start tightening the
screws around the GPU core first, and then continuing outward to
prevent damage to the GPU. After securing the GPU PCB, reuse
the I/O Bracket and tighten it with the one (1) M2.5 x 4 AX1 Screw
and N2.5 Nut.
For this step, you will need:
STEP 2
Screws must be present in the places marked on the picture.
- 11 -
M2.5 x 4 AX1 Polyamide Washer
Screw (8 pcs) (7 pcs)
M 2.5 Nut
I/O Bracket
(1 pc)
Phillips Head
Screwdriver