Synology RackStation RS2418RP+ Hardware Installation Manual page 18

LED Indicator Table
LED Indicator
Power
STATUS
ALERT
Drive Status Indicator
(on tray)
2
PSU Indicator
Rear LAN
(on left side of jack)
Rear LAN
(on right side of jack)
Note: Model specifications are subject to change without notice. Please refer to
1
Please try to restart your RackStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the
drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology
Technical Support for help.
2
Only for RS2418RP+.
18
Color Status
Static
Blue
Blinking
Off
Green Static
Orange Blinking
Off
Orange Blinking
Off
Static
Green
Blinking
Red Static
Off
Green Static
Off
Static
Green
Blinking
Off
Green Static
Orange Static
Off
www.synology.com
Description
Powered on
Booting up / Shutting down
Powered off
Volume normal
Volume degraded / Volume crashed
Volume not created
DSM not installed
HDD hibernation
Fan failure / Over temperature
System normal
Drive ready and idle
Accessing drive
1
Drive error
No internal drive
Power supply unit normal
Power supply unit off
Network connected
Network active
No network
1 Gbps connection
100 Mbps connection
10 Mbps connection / No network
for the latest information.
B
Appendix