Start Up Your Rackstation - Synology RackStation RS2418RP+ Hardware Installation Manual

Start Up Your RackStation

1 Connect one end of each power cord to the power ports located on the back of the RackStation and the other
end to a power outlet.
2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub.
3 Make sure the Power Supply On/Off Switch is turned on ("─").
2
4 Press the power button to turn on the RackStation.
Congratulations! Your RackStation is now online and detectable from a network computer.
2
Only for RS2418+.
15 Chapter 2: Hardware Setup