Changing The Boot Priority - Samsung P400 User Manual

Changing the Boot Priority

The default boot priority of your computer is the CD-ROM first, then a removable device and then the hard disk drive
in this order.
By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures to
change the highest boot priority device to the hard disk drive are described below.
1
Select the Boot menu in the BIOS Setup.
2
Press <Enter> on the Boot Device Priority item.
Boot Device Priority
NumLock
Enable Keypad
Summary screen
Boor-time Diagnostic Screen
PXE OPROM
Brightness Mode Control
Wireless Device Control
Smart Battery Calibration
[Off]
Select system boot
[By NumLock]
options
[Disabled]
[Disabled]
[Only with F12]
[Auto]
[Always On]
3
Move to the IDE HDD using the ↓ key and press the
F6 key to move it to the top.
Boot priority order:
▼ IDE CD : xxxxxxxxxxxxxxxxxxx
▼ IDE HDD : xxxxxx xxxxxxx
▼ USB KEY : Not Installed
▼ USB CDROM : Not Installed
▼ USB FDC : Not Installed
▼ USB HDD : Not Installed
▼ PCI BEV : Not Installed
▼
Excluded from boot order:
▼ USB ZIP : Not Installed
▼ USB LS120 : Not Installed
4
Press the F10 key to save the settings and exit
Setup. The highest boot priority device is now set to
the Hard Drive.
17
Boot Device Priority