Changing The Boot Priority - Samsung P408 User Manual

Changing the Boot Priority

The default boot priority of your computer is the CD-ROM first, then a removable device
and then the hard disk drive in this order.
By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an
example, the procedures to change the highest boot priority device to the hard disk drive
are described below.
1
Select the Boot menu in the BIOS
Setup.
2
Press <Enter> on the Boot Device
Priority item.
Boot Device Priority
NumLock
Enable Keypad
Summary screen
Boor-time Diagnostic Screen
PXE OPROM
Brightness Mode Control
Wireless Device Control
Smart Battery Calibration
[Off]
Select system boot
[By NumLock]
options
[Disabled]
[Disabled]
[Only with F12]
[Auto]
[Always On]
3
Press the down key (↓) to move to the
AHCI HDD item and press the F6 key to
move up to the top item.
Boot priority order:
▼ IDE CD : xxxxxxxxxxxxxxxxxxx
▼ IDE HDD : xxxxxx xxxxxxx
▼ USB KEY : Not Installed
▼ USB CDROM : Not Installed
▼ USB FDC : Not Installed
▼ USB HDD : Not Installed
▼ PCI BEV : Not Installed
▼
Excluded from boot order:
▼ USB ZIP : Not Installed
▼ USB LS120 : Not Installed
4
Press the F10 key to save the settings
and exit Setup. The highest boot
priority device is now set to the Hard
Drive.
0
Boot Device Priority