Changing The Boot Priority - Samsung R418 User Manual

Table of Contents

Advertisement

Changing the Boot Priority

The default boot priority of your computer is the CD-ROM first, then a removable device
and then the hard disk drive in this order.
By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an
example, the procedures to change the highest boot priority device to the hard disk drive
are described below.
1
Select the Boot menu in the BIOS
Setup.
2
Press <Enter> on the Boot Device
Priority item.
Boot Device Priority
NumLock
Enable Keypad
Summary screen
Boor-time Diagnostic Screen
PXE OPROM
Brightness Mode Control
Wireless Device Control
Smart Battery Calibration
[Off]
Select system boot
[By NumLock]
options
[Disabled]
[Disabled]
[Only with F12]
[Auto]
[Always On]
3
Press the down key (↓) to move to the
AHCI HDD item and press the F6 key to
move up to the top item.
[Boot priority order]
1. AHCI CD
2. AHCI HDD
3. USB KEY
4. USB CD
5. USB FDD
6. USB HDD
7. PCI BEV
8.
[Excluded from boot order]
- IDE HDD
- IDE CD
- PCI SCSI
- USB ZIP
- USB LS120
4
Press the F10 key to save the settings
and exit Setup. The highest boot
priority device is now set to the Hard
Drive.

Boot Device Priority
: XXXXXXXXXXXXXX
: XXXXXXXXXXXXXXXX
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

R468R467

Table of Contents