Wireless Network Setup Using The Wireless Lan Setup Program - Samsung P400 User Manual

Wireless Network Setup Using the Wireless LAN Setup Program

The procedures to connect to an access point using a
wireless LAN configuration program are described. Since
the wireless LAN configuration program is included in
the System Software Media, the user has to install the
program.
For Intel Wireless LAN card (Optional)
1
Insert the System Software Media into the CD drive
and install the wireless LAN configuration program
(PROSet).
2
Double-click the wireless LAN program (
the taskbar. (Or, click Start > All Programs > Intel
PROSet Wireless > Intel PROSet Wireless.)
To connect to an access point or existing computer-
to-computer (Ad Hoc) network refer to the following
procedures.
3
In Available Networks, click on Refresh.
4
Select the name of desired access point or computer-
to-computer network to connect from the searched
available networks list, and click Configure.
Note
5
Enter Profile Name and click Next.
) icon on
6
In the Search Security Settings window, the wireless
network security search message will appear.
Click Next.
8
If your desired network does not appear, click
Refresh.
An access point is represented by the (
a computer-to-computer network is represented by
the ( ) icon. An ( ) icon is displayed in front of an
access point or a computer-to-computer network
with configured security settings.
) icon, and