RCA P61300 User Manual page 15

Setup and Connections
FRONT and REAR SPEAKER Terminals Use to connect external speakers for
front sound and rear surround sound.
FRONT SPEAKER INT. / EXT. (switch) Set to INT. if you want to use the
internal TV speakers only or the interal TV speakers plus separate rear speakers.
Set to EXT. if you want to use any combination of front external speakers. This
switch does not turn off the TV center speaker.
TRANSMITTER OUT Use to connect an optional component such as a wireless
audio transmitter. Audio volume from the main front and rear speakers is
variable audio.
FIX/VARIABLE OUT Use to connect an audio receiver or amplifier (an auxiliary
baseband component) for variably-controlled or fixed level stereo output. When
set to fixed (via the Audio Output choice in the Speakers menu), a fixed-level
audio signal is provided, making these jacks ideal for audio recording or for use
with an audio amplifier that has its own remote control.
LFE/SUBWOOFER OUT Use to connect a LFE (Low Frequency Effects) powered
subwoofer. This jack is tailored for carrying low frequency information. You will
not be able to use this jack and the DIGITAL AUDIO OUT (an optical output)
simultaneously.
INPUT 1 Lets you connect a baseband NTSC (analog) component such as a VCR,
laserdisc player, Internet access device, or DVD player.
• R AUDIO provides right audio connection. The right audio connector is usually
red.
• L AUDIO provides left audio connection. The left audio connector is usually
white.
• VIDEO provides composite video connection. The video connector is
usually yellow.
• S-VIDEO lets you connect an S-Video cable for better video quality
picture to a component with S-Video capability, such as a VCR or DVD
player. When using S-Video, make sure to connect the two audio cables,
as well as the S-Video connector.
INPUT 2 Provides connection to a second NTSC (analog) video component such
as a VCR or laserdisc player. Its jacks are the same as described for INPUT 1, above.
INPUT 3 Provides connection to a third NTSC (analog) video component, such as
a VCR or laserdisc. Its jacks are the same as described for INPUTS 1 and 2, except
with no S-Video jack.
FRONT SPEAKER
+ +
R L
_ _
+ +
R L
_ _
REAR SPEAKER
INT.
FRONT SPEAKER
EXT.
TRANSMITTER OUT
R L
LFE/SUB WOOFER
OUT
R L
FIX/VARIABLE OUT
To specify how you have
set up your speakers,
press MENU on the
remote control and
choose Audio. Then
choose Speakers... from
the menu. For details, see
the section "Adjusting TV
Controls" in this book.
S-VIDEO S-VIDEO
VIDEO
VIDEO
VIDEO
L L L
R R R
AUDIO AUDIO
AUDIO
INPUT 1 INPUT 2 INPUT 3
11