Table of Contents
Advertisement
BASIC TV OPERATION
Using the INPUT Button
1.
Repeatedly press the INPUT button to scroll through the available input sources
until you find the input associated with the component (such as VCR or DVD
player) you want to view.
Input
source
Watch the channel banner to see the input sources change
with each press of the INPUT button.
2.
Once you have found the input source you want, stop pressing INPUT.
•
If you tune to VID1 and your VCR is connected to that input, you will be able
to view your VCR. To play, stop, or rewind the VCR1 tape using the remote
that came with your TV, you must first press the VCR1 button to put the
remote control in VCR mode.
There are other ways of selecting an input channel:
•
Program the component (VCR, DVD, etc.) buttons on the remote control to
automatically tune to the correct input channel when pressed. See the section in
this book, "System Options and Preferences" for information on auto tuning.
•
After pressing INPUT on the remote, enter the digits 1, 2, 3, or 4 to tune to
(S)VID1, 2, 3, or FRONT, respectively.
30
ON•OFF
VCR1
TV
DVD
VCR2
AUX
DIRECTV
MUTE
SKIP
+
CH
CH
FETCH
GO BACK
GUIDE
INFO
OK
MENU
CLEAR
1
2
3
4
5
6
7
8
9
INPUT
ANTENNA
INPUT
0
button
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
PIP
SWAP CH CTRL WHO
Press INPUT then GUIDE
on the remote control to
view a guide-like list of
your line inputs and
corresponding channels.
Advertisement
Table of Contents
