Setting The Directv Rating Limit - RCA P61300 User Manual

Rca p61300: users guide
Hide thumbs Also See for P61300:
Table of Contents

Advertisement

Using the Profiles
3.
Lock the system. See "Locking the System" near the end of this section for
details.
After a spending limit is set and the system is locked, you must enter a password to
purchase a Pay Per View program that costs more than your spending limit allows.
The system will then temporarily unlock the limits you have set until the power is
turned off. When the system is turned back on, the system will be locked again.

Setting the DIRECTV Rating Limit

The Set Rating Limit menu enables you to set a maximum viewing limit for rated
DIRECTV movies (based on the MPAA ratings system).
Note that the rating limit cannot be enforced if a DIRECTV program has not been
rated, if rating information for that program is not transmitted by the program
provider, or if the system has not been locked.
1.
Select a user.
2.
Select DIRECTV Setup.
3.
Highlight Set Rating Limit and press OK.
Use the arrow buttons on the remote control to move the selector up
and down.
4.
Use the up and down arrows to move the rating selector to the highest rating
you want to be able to view. In the preceding illustration, movies that are rated
up to and including a PG-13 rating can be viewed.
After the rating limit is set and the system is locked, you must enter the system
password to watch programs with a rating higher than the limit. The system will then
temporarily unlock the limits you have set until the power is turned off. When the
system is turned back on, the system will be locked again.
56
Important!
You need to lock the
system in order for
rating limits, channel
limits, and spending
limits to go into effect.
To edit the limits after
you lock the system, you
need to enter the system
password. See "Locking
the System" for details.
Please note that the rating
limit you set while in the
DIRECTV Setup menu
applies only to the
selected profile and to
DIRECTV programs—it
does not apply to TV
programs.
To set limits for TV
programming, select a
profile, select TV Setup
and then select Set TV
Rating or Set Movie
Rating.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rca - 1999 tocom 15469270

Table of Contents