Omron SYSMAC CV500-BSC11 Operation Manual page 243

Revision History
Revision code Date Revised content
04 August 2003 Changes were made on the following pages.
Page xii: Added information on safety precautions for external circuits.
Page xiii: Added "Power Supply Units" to application precaution.
Page 24: Added information on specifying cyclic areas and reading and writ-
ing from cyclic areas using the PC READ and PC WRITE instructions.
Information on output words also added.
Page 25: Added information on input words.
Pages 32, 33: Changed "+0" to "+1" in diagram.
Page 34: Changed "+14" to "+15" in top diagram and changed "+15" to "+14"
in bottom diagram.
Page 35: Changed "+16" to "+17" in top diagram and changed "+17" to "+16"
in bottom diagram.
Page 36: Changed "+18" to "+19" in top diagram and changed "+19" to "+18"
in bottom diagram.
Page 39: Changed "+116" to "+117" in top diagram and changed "+117" to
"+116" in bottom diagram.
242