Page 1
Bulaşık Makinesi Kullanma Kılavuzu Dishwasher User’s Manual 6220 T Document Number : 1 728762959_EF_Arcelik_6220 T_EN/ 03-10-16.(15:23)
Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 3
Dishwasher User’s Manual 6220 T Document Number : Document Number : 1 728762959_EF_Arcelik_6220 T_EN/ 03-10-16.(15:23) 1 728762959_EF_Arcelik_6220 T_EN/ 03-10-16.(15:23)
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT This section contains safety spreading or pouring water instructions that will help to onto it! There is the risk of get protected from risk of electric shock! • personal injury or property Never touch the plug damage.
instructions for safety and environment hot vapour when you need unless they are attended to open the door. by a person who will be responsible for their safety Intended use or who will instruct them accordingly for use of the •...
instructions for safety and environment Transportation of the collection center for the recycling of electrical and product electronic equipment. Please If you need to move consult your local authorities the product, do it to learn about these collection in upright position centers.
Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address: standard.test@arcelik.com Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product may be found on the type label attached to the side wall of the door.
INSTALLATION Refer to the nearest Authorised When placing the product, pay Service Agent for installation of your attention not to damage the floor, walls, product. To make the product ready piping, etc. Do not hold the product for use, make sure that the electricity, from its door or panel to move it.
Installation Connecting water supply Use a screw-on hose connector to connect the We recommend attaching water inlet hose to a water a filter on the house/ tap with a ¾ inch external apartment supply water thread. If required, use a inlet to protect the machine filter insert to filter deposits from damages that may...
Installation shall not be liable for any damages that will arise when the product is used max 100 cm without grounding in accordance with the local regulations. • Connection must comply with national regulations. min 50 cm • Power cable plug must be within min 4cm easy reach after installation.
Installation Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. • To prepare the product to do the dishes, perform first operation in the shortest programme with detergent while the machine is empty.
PREPARATION Tips for energy saving Adding salt Following information will help you use Water softening system needs to be the product in an ecological and energy- regenerated in order that the product efficient manner. operates with the same performance Wipe away any coarse food remnants continuously.
Preparation You can put about 2 kg of dishwasher salt into the salt reservoir. 4. Replace the lid and tighten it securely when the reservoir is full. 5. If you will not start a washing programme immediately after adding the salt, run the machine empty in the shortest programme Salt reservoir will fill with to dissolve and wash away the...
Page 17
Preparation 1 min. 1 Second 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Page 18
Preparation Regeneration Adjustment Switch 0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters.
Preparation Detergent You can use powder, liquid/gel and tablet detergents in the machine. Only use the detergents produced particularly for use with dishwashers. Never use washing up liquids. We recommend you not to use detergents that contain chlorine and phosphate 2.
Preparation by pressing on it lightly. A “click” will of water hardness. Above this limit be heard when the lid is closed. regeneration salt and rinse aid must be added. Refer to the instructions on the In programmes with prewash packaging of the combined detergent and high temperature, whether it is suitable for the hardness...
Preparation Rinse aid washing, level must be increased and if there is a blue trace after The rinse aid used in wiping them by hand, it must be dishwashers is a special decreased. This is set to position 4 combination used to as factory default.
Page 22
Preparation Decorative prints of To prevent possible injuries, chinaware as well as always place the sharp and aluminum and silver items pointed dishes such as may get discoloured or service fork, bread knife, tarnished after washing in etc. upside down so as their the dishwasher just as it pointed ends will face down happens in handwashing as...
Page 23
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 21 / 48 EN...
Preparation Silverware basket piece Silverware basket (depends on model) (depends on model) You can place your forks, spoons and Silverware basket is designed to wash etc. to upper basket with the additional your dishes such as fork, spoon and piece in the figure.. etc.
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash Cutlery basket is designed to wash your dishes such as knife, fork, spoon, your dishes such as knife, fork, spoon, etc. in an efficient manner. etc.
Preparation Collapsible lower basket wires Bringing the wires to (6 pieces) the horizontal position byholding them from the (depends on model) tips may cause them to The foldable wires (A) located at bend. Therefore, it will the lower basket of the machine are be appropriate to bring designed for an easier placement of the wires in the middle to...
Preparation Collapsible lower basket wires Collapsible lower basket wires (4 pieces) (2 pieces) (depends on model) (depends on model) The four piece foldable wires located The two piece foldable wires located at the lower basket of the machine at the lower basket of the machine are are designed for an easier placement designed for an easier placement of of large pieces such as pans, bowls,...
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables bottom basket. a safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose / Make sure that the impeller height adjustable service rack does not touch the dishes (depends on model) you placed on the racks. This accessory located at the lower To close the racks: basket of your machine allows you 1.
Preparation Upper basket glass support Upper basket height piece adjustable rack (depends on the model) (depends on model) When placing long stemmed glasses Use the lower and upper parts of the or wine glasses, do not lean them height adjustable racks in the upper against other pieces but to the edge of basket of the machine by sliding them the basket or to the rack (1).
Preparation Upper basket glass support Collapsable upper basket piece wires (depends on the model) (depends on the model) When placing long stemmed glasses To bring the collapsable wires on the or wine glasses, do not lean them upper basket of the machine into against other pieces but to the edge of horizontal position, press on the latch the basket or to the rack (1).
Preparation Collapsible upper basket tines Collapsible upper basket tines (depends on model) (depends on model) There are foldable tines on the upper Upper basket of the machine is basket of the machine that you can lay equipped with tines with gradual folding down when you need larger space for system (A) that you can lay down big dishes.
Preparation Adjusting the height of the upper basket (depends on model) Basket adjustment mechanism on the loaded upper basket of the machine is designed to allow you create taller areas in the upper or lower section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions.
Preparation Adjusting the height of loaded 3. Make sure that both sides of the basket height adjustment upper basket mechanism are at the same level (depends on model) (down or up). Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your...
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely.
Preparation Upper cutlery basket (depends on model) The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
OPERATING THE PRODUCT 1. Programme Starting Point 2. Rinse Aid indicator 3. Salt indicator 4. On/Off Indicator Light & Progress Indicator Lights 5. Start / Stop key Tablet detergent function On/Off on water, electricity and time if the Machine will be switched on when you machine is only half full.
Operating the product Starting your machine Your machine performs water softening depending 1. Open the tap. on the hardness level 2. Plug in to the socket. of the supply water. The 3. Open the door of the dishwasher. total time can also change 4.
Operating the product Salt indicator Tablet detergent function Allows to obtain a better drying Please check the Salt Indicator on the performance from the multi-purpose panel to see whether there is adequate detergents called as all in one amount of softening salt in the detergents such as 2in1, 3in1, 4in1, dishwasher or not.
MAINTENANCE AND CLEANING Cleaning the filters Service life of the product extends and frequently faced problems decrease if Clean the filters at least once a week it is cleaned at regular intervals. in order for the machine operates Unplug the product and turn efficiently.
Operating the product Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Operating the product Cleaning the impellers Upper impeller Clean the impellers at least once a Check if the holes on the upper week in order for the machine operates impeller (1) are clogged. If they efficiently. are clogged, remove and clean the impeller.
TROUBLESHOOTING Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. • Door of the machine is open. >>> Make sure that you have closed the door of the machine. • On / Off button is not pressed. >>> Make sure that you have turned on the machine by pressing the On / Off button. Dishes are not washed clean • Dishes are not placed orderly in the machine. >>> Load the dishes as described in the user manual. • Selected programme is unsuitable. >>> Select a programme with a higher temperature and cycle time. •...
Page 47
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed. Slightly open the door and wait for evacuation of the steam inside for a while. Unload the dishes after the pieces cool down to a touchable level.
Page 48
Troubleshooting • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme.
Page 49
Troubleshooting • Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers. • Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers.
Page 50
Troubleshooting • Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.
Need help?
Do you have a question about the 6220 T and is the answer not in the manual?
Questions and answers