Page 1
Bulaşık Makinesi Kullanma Kılavuzu Dishwasher User’s Manual 63103 I WF Document Number : 1728763976_AA_ARCELIK_63103 I WF_EN/ 14-05-18.(15:46)
Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 3
Dishwasher User’s Manual 63103 I WF Document Number : Document Number : 1 728763976_AA_ARCELIK_63103 I WF_EN/ 14-05-18.(15:46)
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
INSTRUCTIONS FOR SAFETY AND ENVIRONMENT This section contains safety onto it! There is the risk of instructions that will help to electric shock! get protected from risk of • Never touch the plug personal injury or property with wet hands! Never damage.
instructions for safety and environment Be careful for the rush of hazards involved. Children hot vapour when you need shall not play with the to open the door. appliance. Cleaning and user maintenance shall Intended use not be made by children without supervision.
instructions for safety and environment Transportation of the collection center for the recycling of electrical and product electronic equipment. Please If you need to move consult your local authorities the product, do it to learn about these collection in upright position centers.
Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address: standard.test@arcelik.com Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product may be found on the type label attached to the side wall of the door.
INSTALLATION Refer to the nearest Authorised When placing the product, pay Service Agent for installation of your attention not to damage the floor, walls, product. To make the product ready piping, etc. Do not hold the product for use, make sure that the electricity, from its door or panel to move it.
Installation Connecting water supply Use a screw-on hose connector to connect the We recommend attaching water inlet hose to a water a filter on the house/ tap with a ¾ inch external apartment supply water thread. If required, use a inlet to protect the machine filter insert to filter deposits from damages that may...
Installation Adjusting the feet Drainpipe must be connected to the sewage If the door of the product cannot be system and it should not be closed properly or if the product swings connected to any surface when you push it slightly, then you water.
Installation Initial use • The voltage and allowed fuse or breaker protection are specified Before starting to use the product, in the “Technical specifications” make sure that all preparations section. If the current value of are made in accordance with the the fuse or breaker in the house instructions in sections “Important is less than 16 Amps, have a...
PREPARATION Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and Cleaning, rinsing and drying energy-efficient manner. performance of your dishwasher will Wipe away any coarse food remnants increase when water softening system on the dishes before putting them in is adjusted properly.
Installation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation 2. Turn the salt reservoir lid counter- If your machine is equipped clockwise to open it (A). with “Automatic Water Hardness Detection System”, water hardness adjustment will be made by the service/user as standard during first installation. If you move your house, your machine will automatically perform water hardness level adjustment according to the...
Preparation Pay attention to the You need to add salt right warnings on the detergent before starting the machine. packaging to get better Thus, the overflowing washing and drying results. salty water will be flushed Contact the manufacturer immediately, preventing of the detergent for further the risk of corrosion in questions.
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These 3.
Preparation Contact the detergent manufacturer if your dishes are wet and/or if you notice limescale spots particularly on your glasses after the washing programme is over when using a tablet detergent. 2. Fill the reservoir until “MAX” level. When you switch to powder detergent from tablet detergent: 1.
Preparation dishes in an orderly way. Wipe clean any spilled • Wipe away any coarse food rinse aid outside the remnants (bones, seeds, etc.) on reservoir. Rinse aid that the dishes before placing them in spilled accidentally will the dishwasher. cause foaming and it will •...
Page 23
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware /61 EN Dishwasher / User’s Manual...
Preparation Silverware basket piece Silverware basket (depends on model) (depends on model) You can place your forks, spoons and Silverware basket is designed to wash etc. to upper basket with the additional your dishes such as fork, spoon and piece in the figure.. etc.
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash Cutlery basket is designed to wash your dishes such as knife, fork, spoon, your dishes such as knife, fork, spoon, etc. in an efficient manner. etc.
Preparation Collapsible lower basket wires Bringing the wires to (6 pieces) the horizontal position byholding them from the (depends on model) tips may cause them to The foldable wires (A) located at bend. Therefore, it will the lower basket of the machine are be appropriate to bring designed for an easier placement of the wires in the middle to...
Preparation Collapsible lower basket wires Collapsible lower basket wires (4 pieces) (2 pieces) (depends on model) (depends on model) The four piece foldable wires located The two piece foldable wires located at the lower basket of the machine at the lower basket of the machine are are designed for an easier placement designed for an easier placement of of large pieces such as pans, bowls,...
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables bottom basket. a safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose / Make sure that the impeller height adjustable service rack does not touch the dishes (depends on model) you placed on the racks. This accessory located at the lower To close the racks: basket of your machine allows you 1.
Preparation Upper basket multipurpose If you want to use the upper basket service rack multipurpose service rack again, you can easily attach it to the side section (depends on model) of your upper basket. This accessory located at the upper basket of your machine allows you to easily wash pieces such as extra long ladles and bread knives.
Preparation Upper basket glass support Upper basket height piece adjustable rack (depends on the model) (depends on model) When placing long stemmed glasses or Use the lower and upper parts of the wine glasses, do not lean them against height adjustable racks in the upper other pieces but to the edge of the basket of the machine by sliding them basket or to the rack (1).
Preparation Upper basket glass support Collapsable upper basket piece wires (depends on the model) (depends on the model) When placing long stemmed glasses or To bring the collapsable wires on the wine glasses, do not lean them against upper basket of the machine into other pieces but to the edge of the horizontal position, press on the latch basket or to the rack (1).
Preparation Collapsible upper basket tines Collapsible upper basket tines (depends on model) (depends on model) There are foldable tines on the upper Upper basket of the machine is basket of the machine that you can lay equipped with tines with gradual folding down when you need larger space for system (A) that you can lay down big dishes.
Preparation Collapsible upper basket Adjusting the height of the wires upper basket (depends on model) (depends on model) You can use collapsible wires when Basket adjustment mechanism on the you need a larger space for your loaded upper basket of the machine dishes in the upper basket of your is designed to allow you create taller machine.
Preparation To lower the basket: 1. Press the latch on the basket adjustment mechanism (right or left) to lower the basket (B). 2. Repeat the same process to lower the other side of the basket. 3. Make sure that both sides of the basket height adjustment mechanism are at the same level (down or up).
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket 1. Hold the upper basket wires with (depends on model) both hands, slightly lift up the The upper basket height adjustment basket and simultaneously push mechanism has been designed for and release the latches shown in...
Preparation Height setting with empty Ceiling cutlery basket basket (depends on model) Ceiling cutlery basket is designed (depends on model) to wash your cutlery items such as In this model, the height setting of the forks, spoons and etc. by placing them upper basket may be changed using between the bars on the basket.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Preparation Upper cutlery basket (depends on model) The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
OPERATING THE PRODUCT 1. On/Off key 2. Program Selection key 3. Function keys HomeWhiz Fast+ Function c) Child lock / Extra Drying Function d) Settings Menu / AquaIntense Function 4. Time Delay key 12 13 5. Start/Pause/Cancel key 10. Function Selected indicator 6.
Operating the Product Keys Time delay key It should be pressed to make the time On/Off key delay settings. It is used to switch on or off the machine. Preparing the machine Press On / Off key for 1 second to 1.
Page 45
Operating the Product . You can download the programs in the table instead of the downloaded program. . The product is set as the program shown as (*) as the Downloaded Program at the factory Programme Table Programme number Programme name Daily QuietWash İnner Clean...
Operating the Product Auxiliary functions Fast+ Function It shortens the time of the washing Washing programmes of your cycle selected and decreases water dishwasher are designed to obtain consumption by enabling washing the best cleaning effect, considering under higher pressure. the type of the soil, soiling degree and Extra Drying Function properties of the dishes to be washed.
Operating the Product Scheduling the washing time When you press the key without canceling the Time Delay time delay function, “Time If an economical electricity tariff is Delay On” warning will be applied in your region, you can use the displayed.
Operating the Product left aligned and the remaining time is Your machine performs shown as right aligned. This screen water softening depending and bar screen alternate in every 10 on the hardness level of the seconds. mains water. Remaining time displayed towards the After the rinsing step the end of the programme can machine will wait silent in...
Operating the Product There might be residues of Child lock does not lock the detergent or rinse aid left door of the machine. in the machine and/or on If you switch your machine the pieces being washed off by using On/Off key at the depending on the step in end of the programme, the which the programme has...
Page 50
Operating the Product 5. Use the Function a key (see. Time Delay and Start / Section 5, Operating the Appliance) Pause / Cancel keys do not to make changes in the menus. have any function in the Changes that have been made are "Settings Menu".
Page 51
Operating the Product Do not stand in front of the door while it is opening. Inner Illumination When you switch "Doormatic" feature When you enable this function, internal to Off position, it will be disabled for all illumination lamp will light every time programmes.
Operating the Product menu without saving. programme without detergent or a long washing programme with detergent Factory Settings? based on the degree of dirtiness. Proceed as indicated below to cancel Salt indicator ( all of your personal settings and Please check the salt indicator on restore the factory settings: the display to see whether there is adequate amount of softening salt...
Operating the Product Please call the service when you see this warning on the Display Information line. It is possible that your machine has taken in plenty of water due to various reasons. End of programme Once the washing programme is over, "Program over"...
HOMEWHIZ You can check your dishwasher and If you are using the application for the learn about its status via your smart first time, complete the registration device with the HomeWhiz function. process with your e-mail address on the application. Once you've completed You can use your machine the registration process, you can use via your smart device while...
Page 55
HomeWhiz remain on when the connection is connected to the same network. established. 2. Tap "Add/Remove Appliance" 8. Once your dishwasher is on the Appliances page. You connected to the selected network, can see the appliance and the you need to connect to the same user it belongs to under "Other network on your smart device.
Page 56
HomeWhiz 1. Go to "Delete HomeWhiz Linking" On" and wait for the machine to from the Settings menu. connect. Then close the HomeWhiz application on your smart device 2. Press Function b key (see. Section and start it again. 5, Operating the Appliance). "Deleting Linking?"...
MAINTENANCE AND CLEANING Cleaning the filters Service life of the product extends and frequently faced problems decrease if Clean the filters at least once a week it is cleaned at regular intervals. in order for the machine operates Unplug the product and turn efficiently.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a Check if the holes on the upper week in order for the machine operates impeller (1) are clogged. If they efficiently. are clogged, remove and clean the impeller.
TROUBLESHOOTING Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 61
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 62
Troubleshooting • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash programme to remove the salt that spilled inside the machine.
Page 63
Troubleshooting • Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers. • Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well.
Page 64
Troubleshooting • Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.
Need help?
Do you have a question about the 63103 I WF and is the answer not in the manual?
Questions and answers