Daikin ETBH16DF9W User Reference Manual page 54

4 | Operation
User reference guide
54
a WLAN adapter
b Router
c Smartphone + app
Configuration
To configure the app, follow the in-app instructions. While doing this, the following
actions and information are needed on the user interface of the indoor unit:
D
User profile
Operation
Wireless gateway
Malfunctioning
Room
[D.1] Mode: Turn mode ON (= WLAN adapter active as access point):
1 Go to [D.1]: Wireless gateway > Mode.
2 In the Enable AP mode screen, select Yes.
[D.2] WPS: Connect the WLAN adapter to the router:
1 Go to [D.2]: Wireless gateway > WPS.
2 In the Connect to home network screen, select OK.
[D.3] Reboot: Reset the WLAN adapter:
1 Go to [D.3]: Wireless gateway > Reboot.
2 In the Reboot the gateway screen, select OK.
[D.4] Device info: Consult information about the WLAN adapter:
1 Go to [D.4]: Wireless gateway > Device info.
2 Read out SSID, MAC address, and Serial number.
The WLAN adapter needs to be installed by the
installer on the indoor unit (on the inside of the
front panel).
Field supply.
The app needs to be installed on the user's
smartphone. See:
http://www.onlinecontroller.daikineurope.com/
[D] Wireless gateway
[D.1] Mode
[D.2] WPS
[D.3] Reboot
[D.4] Device info
ETVH/X16S18+23DA6V+9W(G) + ETBH/X16DF6V+9W
Daikin Altherma 3 H HT F+W
4P586456-1B – 2020.10