Advertisement
TO BUBBLER
10
11
TO BOTTLE
FILLER
31
WATER
INLET
Figure 2 - EZWS-EDFP217K Tube Routing
TO BUBBLER
11
10
29
24
TO BOTTLE
FILLER
31
FILTER
ASSEMBLY
Figure 3 - LZWS-EDFP217K Tube Routing
EDFP217WS
TO BUBBLER
10
10
12
23
22
TO BUBBLER
10
10
WATER
INLET
EDFP217WS*F
REQUIRED TOOLS AND MATERIALS
These tables show special tools and/or additional materials
(not provided) which are necessary to complete installation
of these units:
Special Tools
Item
Additional Materials Not Included
Item
1
Unplated copper inlet pipe
2
Service Stop
3
90° 1-1/4" Drain Line
4
1-1/4" Tee Drain Line
1. Make water supply connections (Fig. 10). Install a shut-off valve
and union connection to building water supply (valve and union
not provided). Turn on water supply and flush the line thoroughly.
Caution: DO NOT SOLDER tubes inserted into the
strainer or filter head as damage to the o-rings may result.
2. Install mounting frame (instructions supplied with mounting
frame.
3. (For LZWS-EDFP217K) Install the filter head to the bracket,
then install filter bracket on mounting frame (Fig. 8), plumb from
the filter outlet using the ¼" elbow, poly tubing and ¼ x ¼ x 3/8"
tee, install filter.
3a. (For EZWS-EDFP217K) Install 3/8" tee, copper tubing and
strainer per (Fig. 2).
4. Install supplied 4" poly tubing and armaflex to the outlet of the
previously installed tee or strainer. Connect supplied ¼ x ¼ x ¼
tee to the 4" poly tubing. With the back panel standing close to
the frame, connect 3/8" poly tube to the bottle filler.
5. Hang main panel on mounting frame hanger. Make sure the
power cord, reset switch wire & poly tube do not get pinched
between the panel & mounting frame. Ensure the panel engages
at the top. Align fountain holes with mounting frame holes.
6. Remove protective coating from main panel.
7. Install reset switch for bottle filler (Fig. 5). Snap the switch into
position after locating wires through slot. Wrap up the excess
cord.
Page 3
Description
Quantity
NONE
Quantity
Description
0000001028 (Rev. H - 03/19)
1
1
1
1
Advertisement
