Advertisement
STEP TWO, CONT...
Hold the thin tube bend with your thumb and finger as
shown. Gently insert the dome into your ear canal.
Using your finger, position the stabilizer into the curvature
of your ear. The stabilizer helps keep the aid secure in your ear.
STEP TWO, CONT...
Place hearing aid behind your ear.
Turn hearing aid on.
If hearing aid is off, press and hold the upper portion of the rocker
switch for 4 seconds until the hearing aid turns on.
3
STEP THREE
Make Adjustments to Your Hearing
Aid Using the Rocker Switch
UPPER ROCKER SWITCH
Press & Hold
Quick Press
TURN ON (
LIGHT)
VOLUME INCREASE
TURN OFF (
LIGHT)
seconds
LOWER ROCKER SWITCH
Press & Hold
Quick Press
CHANGE PROGRAMS
VOLUME DECREASE
seconds
For information on using the Nano Hearing App to control the
volume or programs, please reference the User Manual.
4
STEP FOUR
Remove Hearing Aid
Grasp thin tube bend at the entrance of the ear canal. Gently pull
thin tube out of ear, removing dome from ear.
Remove hearing aid from behind the ear.
Wipe dome clean from any wax, oils, moisture, etc.
Power aid off. Place aid in charging dock when not in use.
Tip: To avoid feedback/chirping when aid is being
removed, turn aid off prior to removal.
Advertisement
