Nvidia ConnectX-6 Dx User Manual page 39

b.

Installing MLNX_OFED Using apt-get
This type of installation is applicable to Debian and Ubuntu operating systems.
Setting up MLNX_OFED apt-get Repository
a.
b.
c.
d.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
mlnx-ofed-vma-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma installer
fc21.x86_64 (without KMP support)
mlnx-ofed-vma-eth-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-eth installer
3.17.4-301.fc21.x86_64 (without KMP support)
mlnx-ofed-vma-vpi-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-vpi installer
3.17.4-301.fc21.x86_64 (without KMP support)
When using an operating system different than RHEL or SLES, or you have installed a
kernel that is not supported by default in MLNX_OFED, you can use the
mlnx_add_kernel_support.sh script to build MLNX_OFED for your kernel.
The script will automatically build the matching group RPM packages for your kernel so
that you can still install MLNX_OFED via yum.
Please note that the resulting MLNX_OFED repository will contain unsigned RPMs,
therefore, you should set 'gpgcheck=0' in the repository configuration file.
Install the desired group.
# yum install mlnx-ofed-all
Loaded plugins: langpacks, product-id, subscription-manager
Resolving Dependencies
--> Running transaction check
---> Package mlnx-ofed-all.noarch
--> Processing Dependency: kmod-isert = 1.0-OFED.3.1.0.1.2.1.g832a737.rhel7u1
ofed-all-3.1-0.1.2.noarch
..................
..................
qperf.x86_64 0:0.4.9-9
rds-devel.x86_64 0:2.0.7-1.12
rds-tools.x86_64 0:2.0.7-1.12
sdpnetstat.x86_64 0:1.60-26
srptools.x86_64 0:1.0.2-12
Complete!
Installing MLNX_OFED using the "YUM" tool does not automatically update the
firmware.
To update the firmware to the version included in MLNX_OFED package, run:
# yum install mlnx-fw-updater
Log into the installation machine as root.
Extract the MLNX_OFED package on a shared location in your network.
It can be downloaded from https://www.nvidia.com/en-us/networking/ → Products
→ Software→ InfiniBand Drivers.
Create an apt-get repository configuration file called "/etc/apt/sources.list.d/
mlnx_ofed.list" with the following content:
deb file:/<path to extracted MLNX_OFED package>/DEBS ./
Download and install NVIDIA's Technologies GPG-KEY.
# wget -qO - http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox | sudo apt-key add -
0:3.1-0.1.2 will be installed
package for kernel 3.17.4-301.
package for kernel
package for kernel
for package: mlnx-
39