Nvidia ConnectX-6 Dx User Manual page 33

Ethernet adapter cards
Hide thumbs Also See for ConnectX-6 Dx:
Table of Contents

Advertisement

After installation completion, information about the OFED installation, such as prefix, kernel
version, and installation parameters can be retrieved by running the command /etc/
infiniband/info. Most of the OFED components can be configured or reconfigured after the
installation, by modifying the relevant configuration files. See the relevant chapters in this
manual for details.
The list of the modules that will be loaded automatically upon boot can be found in the /etc/
infiniband/openib.conf file.
Installation Results
Software
Firmware
Installation Logging
While installing MLNX_OFED, the install log for each selected package will be saved in a
separate log file.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Node GUID
For more details on hca_self_test.ofed, see the file docs/
readme_and_user_manual/hca_self_test.readme.
Installing OFED will replace the RDMA stack and remove existing 3rd party RDMA
connectors.
Most of MLNX_OFED packages are installed under the "/
usr" directory except for the following packages which
are installed under the "/opt" directory:
fca and ibutils
iproute2 (rdma tool) - installed under /opt/
Mellanox/iproute2/sbin/rdma
The kernel modules are installed under
/lib/modules/`uname -r`/updates on SLES and
Fedora Distributions
/lib/modules/`uname -r`/extra/mlnx-ofa_kernel
on RHEL and other RedHat like Distributions
/lib/modules/`uname -r`/updates/dkms/ on
Ubuntu
The firmware of existing network adapter devices will be
updated if the following two conditions are fulfilled:
The installation script is run in default mode; that
is, without the option '--without- fw-update'
The firmware version of the adapter device is
older than the firmware version included with the
OFED ISO image
Note: If an adapter's Flash was originally
programmed with an Expansion ROM image, the
automatic firmware update will also burn an
Expansion ROM image.
In case your machine has an unsupported network
adapter device, no firmware update will occur and the
error message below will be printed.
"The firmware for this device is not distributed inside
NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your
HW vendor."
33

Advertisement

Table of Contents
loading

Table of Contents