Nvidia ConnectX-6 Dx User Manual page 32

d.
e.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Versions: Current Available
FW 12.14.0114 12.14.0114
Status: Up to date

In case your machine has an unsupported network adapter device, no firmware
update will occur and one of the error messages below will be printed. Please
contact your hardware vendor for help with firmware updates.
Error message #1:
Device #1:
----------
Device Type: ConnectX-X
Part Number: MCXXXX-XXX
PSID: MT_2190110032
PCI Device Name: 0b:00.0
Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW 12.14.0114 N/A
Status: No matching image found
Error message #2:
The firmware for this device is not distributed inside NVIDIA driver:
0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor.
Case A: If the installation script has performed a firmware update on your network
adapter, you need to either restart the driver or reboot your system before the
firmware update can take effect. Refer to the table below to find the appropriate
action for your specific card.
Action \ Adapter
Standard ConnectX-4/
ConnectX-4 Lx or higher
Adapters with Multi-
Host Support
Socket Direct Cards
Case B: If the installations script has not performed a firmware upgrade on your
network adapter, restart the driver by running: "/etc/init.d/openibd restart".
(InfiniBand only) Run the hca_self_test.ofed utility to verify whether or not the
InfiniBand link is up. The utility also checks for and displays additional information
such as:
• HCA firmware version
• Kernel architecture
• Driver version
• Number of active HCA ports along with their states
Driver Restart Standard Reboot
(Soft Reset)
- +
- -
- -
Cold Reboot (Hard
Reset)
-
+
+
32