How To Use The Remote After You've Programmed It - RCA D52130 User Manual

Using the Remote Control

How to Use the Remote After You've Programmed It

Because this universal remote can control several different components (TV, DVD, VCR, satellite receiver, etc.) it uses
operational modes triggered by the component buttons. For example, if you want the remote to control the TV, you would
press the TV button to put the remote into TV mode before you could control the TV.
1. Press the appropriate component button (DVD, TV, VCR1, VCR2, SAT•CABLE, AUX) to set the remote to control the
component.
2. Press ON•OFF to turn the component ON or OFF.
3. Use the remote buttons that apply to that component.
Notes:
• The remote may not be compatible with all brands and models of components. It also may not operate all functions
of the remote that came with your component.
• If you keep pressing buttons and nothing happens, the remote is probably in the wrong mode. You must press the
component button that matches the component you want to operate (i.e., if you want to operate the VCR, press
VCR1 on the remote control to put the remote in VCR mode.)
30 Chapter 2