How To Connect: Tv + Dvd + Vcr - RCA D52130 User Manual

VCR

How to Connect: TV + DVD + VCR

1. Connect your DVD Player to your TV.
A. Connect the DVD player's audio/video output jacks to the INPUT2 AUDIO (R and L) and VIDEO jacks on the TV
using audio/video cables. If your DVD player has an S-Video output, you can make the video connection by using
the S-Video jacks instead.
Notes:
• If you are using an S-Video cable, you must also use audio cables. The S-Video cable only transfers video
information.
• If your DVD player has a component video output, we recommend you use the component video input on the TV
instead of the standard video or S-Video connection.
2. Connect your VCR to your TV.
A. Connect a coaxial cable to the VCR's antenna output and to the ANTENNA/CABLE INPUT jack on the TV.
B. Connect the VCR's audio/video output jacks to the INPUT1 AUDIO (R and L) and VIDEO jacks on the TV using
audio/video cables.
3. Make sure cable or antenna is connected to your VCR.
A. Connect the coaxial cable carrying your television signal (off air or cable) to the antenna input on the VCR.
Viewing the Components
1. Turn on the TV and the component(s) you want to view.
2. Press the TV button on the remote control.
3. Press the INPUT button on the remote control to scroll through the video inputs.
• The VCR can be viewed on the VID1 input channel.
• The DVD player can be viewed on the VID3 input channel.
Note: You can set up the TV to automatically tune to the correct input channel. This is called Autotuning. (See Chapter
3 for more information.)
Chapter 1
VIDEO L AUDIO
R
IN
ANTENNA IN
VIDEO L AUDIO R
OUT
ANTENNA OUT
2B
DVD PLAYER
S-VIDEO
VIDEO L AUDIO R
Connections & Setup
OR
CABLE
OFF-AIR ANTENNA
3
2A
AUDIO
VIDEO L R
INPUT1
ANTENNA/
CABLE INPUT
INPUT2
INPUT3
POWER
1
COMPONENT VIDEO INPUT
S-VIDEO AUDIO
Y P P
R B R
HIGH RESOLUTION
L
AUDIO INPUTS
L
HDTV MONITOR
INPUT
AUDIO OUTPUTS
FIXED VARIABLE
L R L
R
EXT SPEAKERS
EXT
R G-LINK
INT
+ +
R L
Go to page 15
11