Quick Guide To Your Tv - RCA C29400 User Manual

Quick Guide to Your TV

Startup
The steps below will get your TV connected and ready for watching.
For more details, see the page numbers listed.
1
. Hook up your TV
Details are in the Connections
Guide.
CAUTION: Choose the location for your TV carefully. Take precautions that the stand or other furniture on
which the TV is placed is properly located (see Important Safeguards sheet) and of adequate size and
strength to prevent the TV from accidentally being tipped over, pushed off, or pulled off. This could cause
damage to the TV and/or personal injury.
2
. Plug in the TV
3.
Put Batteries in the Remote
2
Hook up any antennas, cables or
other equipment to your TV before
you follow the steps below.
For Model M29400:
Plug the cord into the outlet,
matching the wide and the small
end of the plug with the outlet.
For Model C29400:
A. Plug cord into adapter as shown at
the left.
B. Plug the adapter into the outlet,
matching the prongs with the outlet.
A. Pull off the cover of the battery
compartment.
B. Place the batteries, matching
+ –
the and end of each battery
in the compartment.
C. Replace the cover.