Using Your TV and Remote
With VCRs: Setting the VCR1 Channel
The VCR 1 Channel works with the VCR1 button on the remote. If the
VCR 1 Channel is set, pressing VCR1 selects the channel to see the VCR
picture. The VCR 1 Channel setting depends on which diagram you have
used from the Connection Guide. If you want to turn this feature off, set
the VCR 1 Channel to Disable. Refer to the chart below for your setting.
1.
Select the Setup Menu
2.
Highlight VCR1 Channel
3.
Enter channel number
Controls Alarm Adjust Setup
E n g l i s h Français Español
A u t o p r o g r a m
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
E n g l i s h Français Español
A u t o p r o g r a m
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 0 3
Controls Alarm Adjust Setup
E n g l i s h Français Español
A u t o p r o g r a m
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
1 3
C l e a r
1 3
C l e a r
1 3
C l e a r
Set VCR1 Channel to:
00
4B, 5B
3 or 4 (same as 3/4 switch)
A.Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
A.Press MOVE
(down) to
highlight the VCR 1 Channel.
B. Press
to highlight the channel.
A.Enter channel 00, 03, or 04.
Choose your setting from the
chart below. Press CHANNEL
down until "Disabled" is
displayed to turn the feature off.