Table of Contents
Advertisement
Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment. Your remote controls only RCA audio equipment
such as a radio, CD player, tape player, turntable, or amplifier. The
remote may need to be programmed for your equipment. This remote
may not operate all models of brands listed below. Use the codes below or
on the sheet packed in with your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA/ Dimensia
AM/FM...........................03
CD....................................07
Tape.................................06
Phono..............................05
Aux..................................04
A. Point the remote at the audio
equipment and hold AUDIO.
B. Enter the code from the
code list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A–D with another code
if the first one does not work.
A.
Point the remote at the audio
equipment and press AUDIO.
B.
Press POWER to turn it on.
C.
Use the buttons on the
remote that relate to audio
functions. Not all buttons
highlighted may work with
your equipment.
D. Turn the audio equipment off
using the audio component's
power off button.
15
Advertisement
Table of Contents
