Tv/Dvd + Receiver - RCA BD20TF10 User Manual

TV/DVD + Receiver

1. Connect the TV/DVD to your cable or antenna
Connect the coaxial cable from your cable or antenna to the ANTENNA jack on the back of
your TV/DVD.
2A. Connect the A/V receiver to your TV/DVD
Connect the audio/video cables. Connect audio cables (white and red) to the AUDIO OUT
jacks on the back of the TV/DVD (R and L) and to the Audio Input Jacks on the receiver
(sometimes labeled AUDIO IN L R).
2B. Connect Dolby Digital or the DTS Receiver to your TV/DVD
If you have a Dolby Digital or DTS receiver with a Digital Input jack, connect an optical
cable (not provided) to the DIGITAL AUDIO OUT jack on the TV/DVD and to the Digital
Input jack on the back of the receiver. You must also set the Digital Output setting in the
Sound menu (Chapter 4 has details).
3. If you're connecting a cable box, connect the G-LINK cable
Connect the G-LINK cable to the G-LINK jack on the TV/DVD. Next step, place the wands
of the G-LINK cable to the cable box (instructions are on page 14).
Chapter 1
Connections & Setup
or
Go to page 14
13