LG 49UV770H Safety And Reference
  1. Manuals
  2. Brands
  3. LG Manuals
  4. LED TV
  5. 49UV770H
  6. Safety and reference

LG 49UV770H Safety And Reference

Hide thumbs Also See for 49UV770H:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating
your TV and retain it for future reference.
43UV770H
49UV770H
*MFL69885587*
55UV770H
65UV770H
55UV970H
65UV970H
P/NO : MFL69885587 (1709-REV01)
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com
Printed in Korea

Advertisement

Table of Contents
loading

Related Manuals for LG 49UV770H

Summary of Contents for LG 49UV770H

  • Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UV770H 49UV770H 55UV770H 65UV770H 55UV970H 65UV970H www.lg.com *MFL69885587* P/NO : MFL69885587 (1709-REV01) Copyright ©...
  • Page 2 Warning! Important Safety • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with instructions the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Read these instructions.
  • Page 3 • Do not attempt to modify this product in any • Use only an authorized AC adapter and power way without written authorization from LG cord approved by LG Electronics. Otherwise, this Electronics. Unauthorized modification could may result in fire, electric shock, malfunction, or void the user’s authority to operate this product.

  • Page 4: Optional Extras

    • Do not short circuit, disassemble, or allow the screen. It is actually part of the screen; do not batteries to overheat. remove it. • Cleaning When cleaning, unplug the power • When attaching the stand to the TV set, place cord and wipe gently with a soft cloth to prevent the screen facing down on a cushioned table or scratching.

  • Page 5: Adjusting The Menu

    Adjusting the Menu • Use at least two people to move a large TV. • When transporting the TV by hand, hold the TV as shown in the When the TV is turned on, press the button one following illustration. time.

  • Page 6: Attaching The Tv To A Desk

    • When adjusting the angle of the TV, watch Stand out for your fingers. - Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. Desk Attaching the TV to a desk Using the Kensington Security System (Depending upon model)

  • Page 7: Mounting On A Wall

    Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket,...

  • Page 8: Connecting To An Antenna Or Cable

    • If you connect a gaming device to the TV, use the connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color cable supplied with the gaming device. • Refer to the external equipment’s manual for setting to off.
  • Page 9 Selects the remote’s operating mode: TV. Selects menus or options and confirms your input. Selects the remote’s operating mode: DVD. (Back) Returns to the previous screen. Changes the input source. Accesses the quick settings. Turns the TV off in a set amount of time. Clears all on-screen displays and returns to Number button Enters numbers.
  • Page 10 For normal images, the effects may not be drastic. Supported licenses may differ by model. For more • Picture Mode change may modify Motion information about licenses, visit www.lg.com. Eye Care settings and it can affect energy consumption. To set additional Picture Options...

  • Page 11: Open Source Software Notice Information

    Avoid LG Electronics will also provide open source code displaying a fixed image on the TV screen for a to you on CD-ROM for a charge covering the cost extended length of time.

  • Page 12: Environment Condition

    Environment condition HDMI (DTV) supported mode • Operating Temperature Horizontal Vertical Resolution 0 °C to 40 °C (32 °F to 104 °F) Frequency (kHz) Frequency (Hz) • Operating Humidity 31.46 59.94 640 x 480p Less than 80 % 31.50 60.00 •...

  • Page 13: Supported Video Formats

    Supported Video Formats Supported Audio Formats File File Format Info Codec Format [Bit rate] 32 Kbps - 320 Kbps VC-1 Advanced Profile [Sample freq.] 16 kHz - 48 kHz .mp3 Video (except for WMVA), VC-1 [Support] MPEG1, MPEG2 .asf Simple and Main Profiles [channels] mono, stereo .wmv WMA Standard (except for...
  • Page 14 Regulatory FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation FCC NOTICE exposure limits set forth for an uncontrolled environment. This transmitter must not be (For USA) colocated or operating in conjunction with any other antenna or transmitter.
  • Page 15 Symbols point operation as appropriate; and • The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask Refers to alternating current(AC). requirement set forth in Section 6.2.2(3) shall be Refers to direct current(DC). clearly indicated. (devices operating in the band 5250-5350 MHz with a maximum e.i.r.p.
  • Page 16 Key CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button...
  • Page 17 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial converter which RS-232C IN is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 18 Set ID For Set ID number, see “Real Data Mapping”. 1 Press to access the main menus. 2 Press the Navigation buttons to scroll to General Set ID and press 3 Press the Navigation buttons to scroll to SET ID and press 4 Scroll left or right to select a set ID number and select (Back), .
  • Page 19 Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Data length : 8 bits Communication code : ASCII code Parity : None Use a crossed (reverse) cable. Command reference list (Depending upon model) DATA DATA COMMAND1 COMMAND2 COMMAND1 COMMAND2 (Hexadecimal) (Hexadecimal)
  • Page 20 Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 21 • Commands may work differently depending definition), Just Scan is available. upon model and signal. • Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially. 01. Power (Command: k a) •...
  • Page 22 [k][g][ ][Set ID][ ][Data][Cr] 11. OSD Select (Command: k l) • To select OSD (On Screen Display) on/off when Data Min : 00 to Max : 64 controlling remotely. Transmission [g][ ][Set ID][ ][OK/NG][Data][x] [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on 07.
  • Page 23 15. Equalizer (Command : j v) [m][g][ ][Set ID][ ][Data][Cr] • Adjust EQ of the set. Data Min : 00 to Max : 64 Transmission [j][v][ ][Set ID][ ][Data][Cr] [g][ ][Set ID][ ][OK/NG][Data][x] 18. Input select (Command: x b) (Main Picture Input) •...
  • Page 24 If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG does not guarantee IR working function. To make sure of this matter, here are two methods as below.

  • Page 27: Child Safety

    CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
  • Page 28 The model and serial numbers of the TV are located LG Customer Information Center on the back and on one side of the TV. Record them For inquires or comments, visit www.lg.com or call; below should you ever need service. USA, Commercial User...

  • Page 29: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...

  • Page 30: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 31 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.

  • Page 32: Customer Computer

    EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...

  • Page 33: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...

  • Page 34: Transmission / Receiving Protocol

    EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 35 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 36 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 37 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 38 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 39 11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 40 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  • Page 42 Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL 43UV770H Guía Rápida de Configuración 49UV770H Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS 55UV770H...
  • Page 43 ENGLISH Read Safety & Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
  • Page 44 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN AUX LAN OPTICAL DIGITAL...
  • Page 45 HDMI IN/ARC USB IN AUX LAN OPTICAL DIGITAL AUDIO OUT GAME CONTROL / M.P.I. SPEAKER OUT LINE OUT...
  • Page 48 (29,5) (22.4) (22,4) 1,100.1 1 100,1 695.8 695,8 640.9 640,9 62.1 62,1 15.9 15,9 12.7 12,7 49UV770H-UA 1.5 A / 150 W 1,5 A / 150 W (43.3) (43,3) (27.3) (27,3) (11.9) (11,9) (25.2) (25,2) (2.4) (2,4) (35.0) (35,0) (27.9)
  • Page 49 (Pour les États-Unis et le Canada) (For USA and Canada only) Ce produit est conforme aux normes (Para Estados Unidos y Canadá) ENERGY STAR® lorsque le réglage This product qualifies for ENERGY STAR® in the factory default (Home d’usine par défaut (Résidentiel) est sélectionné.

This manual is also suitable for:

43uv770h55uv770h55uv970h65uv770h65uv970h

Table of Contents