Initiate Configuration Or Exit The Ez-Manager Wizard - LG 65UV770H Setup Manual

Initiate Configuration or Exit the EZ-Manager Wizard

The Welcome screen provides a brief introduction to the EZ-Manager Wizard.
WELCOME TO THE EZ-MANAGER WIZARD
.
Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using
a USB memory device.
.
If a Pro:Centric server will not be installed, you may select NO PRO:CENTRIC below to disable the Pro:Centric
feature of this TV and exit the EZ-Manager Wizard.
.
If you simply wish to exit the EZ-Manager Wizard, select
Select NEXT to continue.
This wizard will start automatically in 10 seconds.
NO PRO:CENTRIC NEXT
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
first configuration step. Once the wizard has proceeded, it is not possible to return to the Welcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the
the subsequent screen(s).
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight NEXT, and then press OK. Then, continue to the "TV Configuration Options" section on
the following page.
• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this TV
(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on
the Installer Remote to select/highlight the
OK. In the confirmation pop-up window, select EXIT, and then press OK once more on the
Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard's Zoning or USB configuration options, exit the wizard as follows: Use the arrow keys on
the Installer Remote to select/highlight NO PRO:CENTRIC, and then press OK. This will disable
the Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0)
and exit the wizard. In the confirmation pop-up window, select EXIT, and then press OK once
more on the Installer Remote.
206-4323
in the top right corner of the screen.
X
button at the top right of the screen, and then press
X
EZ-Manager Wizard (Cont.)
X
button from
X
17