LG 43UV570H Setup Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 43UV570H
  6. Setup manual

LG 43UV570H Setup Manual

Lodging guest interactive pro:centric tvs commercial mode
Hide thumbs Also See for 43UV570H:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2018 LG Electronics U.S.A., Inc.
43UV570H
49UV570H
Lodging Guest Interactive Pro:Centric 
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
55UV570H
65UV570H
55UV572H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 41 – 43
Cloning Procedures
pages 44 – 49
P/N: 206-4325 (Rev C)
®
TVs

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 43UV570H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LG 43UV570H

Summary of Contents for LG 43UV570H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 41 – 43 Cloning Procedures pages 44 – 49 P/N: 206-4325 (Rev C) © Copyright 2018 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, Follow all instructions.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Cloud Configuration Tool Overview ... . . 50 – 56 Safety Warnings ........2 Important Safety Instructions .

  • Page 6: Commercial Mode Overview

    This document describes how to set up UV570H/UV572H Pro:Centric  TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translation Controller (PTC), or embedded b-LAN™...

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the PTC INSTALLER MENU commercial controller (PTC) Installer Menu and make changes to the xxUV570H default values as required. If necessary, familiarize yourself with the CPU - CTV Installer Menu and how to make and save changes.
  • Page 8 EBL. In this mode, the EBL is the owner of the FTG Channel Map and must be LG’s Cloud Configuration Tool enables you to create configured with an FTG Channel Map and FTG Installer an FTG Configuration (.tlx) file, which may be used to Menu settings using one of the following processes: configure the CPU for FTG Mode.

  • Page 9: Application Tuning Mode / Pro:centric Direct

    Commercial Mode Overview (Cont.) While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • FTG Mode via CPU configuration changes must be made using a “.tlx” file (typically edited in the Cloud Configuration Tool), while FTG Mode via EBL configuration changes must be made using the FTG Device Configuration Application.

  • Page 10: Determining The Tv Operating Mode

    Master TV Setup. See Reference section, “Using the TV Zoning Feature,” for further information. While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only.

  • Page 11: Pro:centric Operation

    Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features...
  • Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4325...

  • Page 13: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 14: Pro:centric Direct Html Application Setup

    Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode (via CPU or EBL), use the appropriate FTG application to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV in accordance with the FTG Mode of configuration.
  • Page 15 Pro:Centric Operation (Cont.) • Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See “Accessing the IP Environment Menu” on page 86 and “Pro:Centric Setup” on pages 59 to 61 for further information.

  • Page 16: Ez-Manager Wizard

    EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation.
  • Page 17 EZ-Manager Wizard (Cont.) Initiate Configuration or Exit the EZ-Manager Wizard The Welcome screen provides a brief introduction to the EZ-Manager Wizard. Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the first configuration step.

  • Page 18: Tv Configuration Options

    EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature on the TV for location-specific configuration purposes, select the “Zone &...
  • Page 19 EZ-Manager Wizard (Cont.) Note: The Zoning feature is only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONE, LABEL, AND ROOM NUMBER   If creating Zones for Installer Menu settings and/or Channel Mapping, TV Zone select the appropriate TV Zone # (0-8) based on the Zone in which <...

  • Page 20: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric Server.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
  • Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom right of the screen, and then press OK. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
  • Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.

  • Page 24: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
  • Page 25 EZ-Manager Wizard (Cont.) USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zone, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into the TV’s USB port. 2.

  • Page 26: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •...
  • Page 27 Ez Download Utility (Cont.) (Continued from previous page) • If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated above (see “Before You Begin”). However, to continue with this procedure and access the Ez Download utility from the TV menus, exit the EZ-Manager Wizard.
  • Page 28 Ez Download Utility (Cont.) (Continued from previous page) 6. If it is not currently selected, use the arrow keys to select Ez Download, and then press OK. As illustrated in the example on the previous page, when Ez Download is selected, a list of files/file types is displayed on the screen.
  • Page 29 Ez Download Utility (Cont.) (Continued from previous page) 10. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are resident on the TV. Note: If you updated the TV configuration with a Clone/Configuration file, upon restart, the TV tunes according to the Start Channel setting in the Installer Menu.

  • Page 30: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool or configuring the EBL locally (.rml) or remotely (via FMA-LG102 / .fma) using the FTG Device Configuration Application software.

  • Page 31: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 33 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 34: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Note: If set to 1, the TV does not respond to ON/OFF commands Specifies entry sequence to the Installer Menu. from either the remote or the display panel, and the Sleep Timer is also nonfunctional.
  • Page 35 Installer Menu (Cont.) 017 - ALARM NOTE: For items 007, 008, and 009 If set to 1, the Alarm feature is enabled and available to the end For legacy reasons, the scale used is 0 – 63. The PTC software user in the Function Menu (i.e., the TV is not in Pass-through will translate this to the 0 –...
  • Page 36 Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to disable display panel rear Aux (AV) input. Disabled External Speaker (Optical/HDMI ARC) Enabled LG Sound Sync (Optical) 041 - SIMPLINK EN Disabled LG Sound Sync (Optical) Set to 0 to disable the SIMPLINK feature. Set to 1 to enable...
  • Page 37 Installer Menu (Cont.) 0 = Black 2 = Green 4 = Red 6 = Yellow 083 - HANDSHK TIME (Handshake Time) 1 = Blue 3 = Cyan 5 = Violet 7 = White Adds an additional delay to the handshake time which is 64 msec, thus relaxing MPI timing requirements to be compatible with PC- If the foreground and background colors for the display characters based Windows controlled systems.
  • Page 38 Installer Menu (Cont.) • 2 = Legacy Model RJPs: DVI Mode Fixed 0.05 Watts Enables RJP feature for use with full cable bundle models. In Fixed 0.10 Watts this mode, when an HDMI/DVI source is connected to the RJP, Fixed 0.20 Watts only digital video is expected via the HDMI cable.
  • Page 39 Installer Menu (Cont.) 102 - ATSC BAND Note that the TV must be turned ON in order to communicate with Selects the RF band used by the ATSC tuner: the embedded b-LAN module for configuration and control when POWER SAVINGS is set to 3. If POWER SAVINGS is set to 1, the 0 = Broadcast 1 = Cable 2 = HRC...
  • Page 40 Installer Menu (Cont.) 121 - UPDATE TIME HR If the TV display is ON when a Wake For Update event is to occur, Based on the settings of this item and item 122 UPDATE TIME the update will take place the next time the TV is turned OFF. MN, the Wake For Update feature wakes the TV once daily to Caution: UPDATE TIME HR should NEVER be set to 255.

  • Page 41: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode via CPU.
  • Page 42 Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2.
  • Page 43 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press MENU PICTURE SETTINGS on the Installer Remote, and select the All Settings Picture menu icon from the Quick Settings Menu to access the advanced TV setup menus.

  • Page 44: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 45 Cloning Procedures (Cont.) (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also, note that Diagnostics is for service use only. TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below.

  • Page 46: Importing A Clone File

    Cloning Procedures (Cont.) (Continued from previous page) 9. When you are ready to continue, i.e., when you have selected the desired filename, press OK on the Installer Remote to select/activate the EXPORT button at the bottom of the screen, and then press OK on the Installer Remote once more to export the file. Export progress will be displayed on the screen.
  • Page 47 Cloning Procedures (Cont.) (Continued from previous page) • If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode, as applicable, after the Clone/Configuration (.tlx) file is imported, ensure the “.tlx” file does not contain an FTG Channel Map; otherwise, the import procedure will result in the Target TV(s) being configured for FTG Mode via CPU.
  • Page 48 Cloning Procedures (Cont.) (Continued from previous page) 3. If applicable (see also “Before You Begin” above), make sure to set the appropriate TV Zone # in the Target TV at this time. Note: In order for the proper TV Zone profile data to be applied, the appropriate TV Zone # must be set in the Target TV BEFORE importing is initiated.
  • Page 49 Cloning Procedures (Cont.) (Continued from previous page) 10. If the Clone/Configuration (.tlx) file includes an FTG Channel Map, you can choose the format for the channel tuning/banner display. Use the arrow keys to select the desired Channel Tuning / Channel Banner Display option—either Logical or Physical—at the right side of the screen.

  • Page 50: Cloud Configuration Tool Overview

    EBL IS IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE. This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration Tool using one of the following web browsers: Google Chrome™...
  • Page 51 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the Wizard Setup, which will guide you through the essential steps of creating the file, i.e., creating the FTG Channel Map and/or the Installer Menu profile(s).
  • Page 52 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) Note: While Setup Menu profiles can be included in the new FTG Configuration file (i.e., the profile[s] can be copied to the FTG Configuration List), Setup Menu profiles are not available for editing. However, on the File Manager page, you may change the Zone assignment for a Setup Menu profile, as required, for those models on which the TV Zoning feature is supported.
  • Page 53 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 6. Export the FTG Configuration List contents to an FTG Configuration (.tlx) file on the PC’s hard drive for later use: • Type a brief descriptive name in the File Name field at the bottom of the FTG Configuration List (avoid using special characters, such as ?, &, @, etc.).

  • Page 54: File Manager Web Page Overview

    Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The following example provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file.

  • Page 55: Channel Map Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the appropriate button to Search for existing channels or add a new RF or IP channel to clear the FTG Channel Map.

  • Page 56: Installer Menu Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign Zone as applicable. Once you click on CREATE (Advanced Setup only) Cloud PROFILE, this Installer Menu profile will be listed under Configuration Tool menu bar the Installer Menu Profile List, and Installer Menu items provides access to all utilities.

  • Page 57: Ip Environment Setup

    IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV. If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 41 to 43), all IP Environment settings, with the exception of Network Setting configuration, may be cloned.
  • Page 58 IP Environment Setup (Cont.) (Continued from previous page) 2. With the Network Menu on display, use the arrow keys on the NETWORK SETT... Installer Remote to select Network Setting. Then, press OK. A Network second Network screen (see example at right) will be displayed. Network / By default, the TV uses DHCP, and if a Local Area Network Pro:Centric...

  • Page 59: Pro:centric Setup

    IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to configure the TV with the appropriate settings to connect to the Pro:Centric server. Use the Up/Down arrow PRO:CENTRIC keys on the Installer Remote to navigate between fields. Network 1. With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Pro:Centric menu option.
  • Page 60 IP Environment Setup (Cont.) (Continued from previous page) Note: If the Data Channel has already been set in the Installer Menu (Installer Menu item 119) or in the EZ-Manager Wizard, the specified channel will appear in the Data Channel data entry field.
  • Page 61 IP Environment Setup (Cont.) (Continued from previous page) • Select/highlight the Update Event field and press OK on the Installer Remote. Then, use the Up/Down arrow keys to select either Enable or Disable from the drop-down list of options. When Update Event is set to “Enable,” an Update Time field is displayed on the screen. •...

  • Page 62: Remote Jack Pack / Tv Connections & Setup

    Reference: Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 1).
  • Page 63 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.
  • Page 64 Reference: Updating TV/PTC Software using a USB Memory Device (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. Use the Up/Down arrow keys to select Update TV Software or Update PTC Software, as applicable, and then press OK.

  • Page 65: Device

    Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager “Logo Image Download” option, though you may also use the Ez Download utility to download the splash screen image, if desired.

  • Page 66: Downloading A Splash Screen Image Using A Usb Memory Device

    Reference: Downloading a Splash Screen Image using a USB Memory Device (Continued from previous page) Note: Ez Download is always selected by default when you initially access the TV Manager. Also note that Diagnostics is for service use only. 5. Use the Up/Down arrow keys to select Logo Image Download, and then press OK. TV MANAGER Logo Image Download USB DEVICE...

  • Page 67: Memory Device

    Reference: Downloading Background Images using a USB Memory Device Background images are intended for use with audio-only channels. Guests may choose to display a slideshow on the screen (as opposed to a blank screen) while audio is playing. This section describes how to download background images using the TV Manager “Insert Background Image(s)”...
  • Page 68 Reference: Downloading Background Images using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)

  • Page 69: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 118 POWER SAVINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 43UV570H 49UV570H 55UV570H/55UV572H 65UV570H...

  • Page 70: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DIRECT ACCESS DATA STATUS STATUS TYPE TYPE 0xD2 Tuning Installer Installer Menu TYPE 0x0D 0x41 SOURCES CURRENT AV Menu Item AUX SOURCE (R) ENABLED (R/W) SOURCE (R) 046 START AUX SRCE Installer Installer...

  • Page 71: B-Lan Setup & Overview

    3 (default) A b-LAN enabled head end device, such as an LG FMA-LG102, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device.

  • Page 72: Ftg Mode Via Ebl (Local Configuration)

    (EBL) connection. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Configuration Application software is available online at: www.lg.com/us/business/display-solutions/ftg. Note: If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings.
  • Page 73 Reference: FTG Mode via EBL (Local Configuration) (Cont.) (Continued from previous page) 5. “Write” the FTG Channel Map to the EBL (switches the EBL from Pass-through Mode to FTG Mode). Note: After a “Write” of new data, the TV will briefly display a green text banner that shows the EBL firmware version and release date.

  • Page 74: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page.
  • Page 75 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 76: Rjp Model List & Input Auto-Sensing Hierarchy

    Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Legacy Models • RJP-101M • RJP-110WBR • RJP-101ML • RJP-110S • RJP-110F • RJP-120G • RJP-110FW • RJP-120T • RJP-110W • RJP-201B/202B RJP Scaler Models • RJP-301B RJP Input Auto-sensing Hierarchy Priority Video Audio...

  • Page 77: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/ password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 78: Using The Tv Zoning Feature

    Reference: Using the TV Zoning Feature This section describes the TV Zoning feature available with the UV570H/UV572H model TVs. The TV Zoning feature enables you to create localized configurations for TVs in selected “Zones” within the installation site, for example, a hotel lobby, fitness center, restaurant, etc. This feature is primarily intended for use when the TV is configured for FTG Mode operation.
  • Page 79 Reference: Using the TV Zoning Feature (Cont.) At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may opt to place Zone restrictions on selected channels in the FTG Channel Map, but at the same time, you can choose to configure all TVs at the site with the same Installer Menu and/or Setup Menu settings.
  • Page 80 Reference: Using the TV Zoning Feature (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Select/highlight the Label field and press OK. Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are finished.

  • Page 81: Uv570H/Uv572H Rear And Side Jack Panels

    Reference: UV570H/UV572H Rear and Side Jack Panels HDMI IN 1 Connection for HDMI/DVI RJP Use Only output from external device. Connection for Remote Jack Pack (RJP) Control cable. Use for network connection OPTICAL DIGITAL AUDIO OUT (i.e., for Pro:Centric data). Use for amps and home theater systems.

  • Page 82: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the UV570H/UV572H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 83: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 84: Tlm Communication Parameters

    Reference: TLM Communication Parameters RS-232C Configuration RS-232C IN (CONTROL) Port Pin Configuration RS-232C IN (CONTROL) Pin Number Description DB9 Serial Port on TV 3.5 V RXD (Receive Data) TXD (Transmit Data) IR Out from TV No Connection No Connection No Connection No Connection If your configuring device has a DB9 serial port, use a DB9-Female to DB9-Female null-modem crossover cable to connect the device to the TV.
  • Page 85 Reference: TLM Communication Parameters (Cont.) Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV (j, k, m or x). [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in the General Menu. Adjustment range is 1 to 99.
  • Page 86 Reference: TLM Communication Parameters (Cont.) TLM Command Detailed Descriptions Note: Commands may work differently depending on model and signal. 01. Power (Command: k a) Transmission • To control TV power (ON  / OFF).  * [k][d][ ][Set ID][ ][Data][Cr] Transmission Data 00: Screen Mute Off (Picture On) [k][a][ ][Set ID][ ][Data][Cr] Video Mute Off 01: Screen Mute On (Picture Off)
  • Page 87 Reference: TLM Communication Parameters (Cont.) 07. Brightness (Command: k h) Transmission To adjust screen brightness. You can also adjust screen [k][l][ ][Set ID][ ][Data][Cr] brightness in the Picture Menu. Data 00: OSD Off 01: OSD On Transmission [k][h][ ][Set ID][ ][Data][Cr] [l][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 64 12.
  • Page 88 Reference: TLM Communication Parameters (Cont.) • 15. Equalizer (Command: j v) Digital Antenna/Cable [Data0]: Physical Channel number  * To adjust EQ of the TV. − Antenna (DTV): 02  –   4 5 (Decimal: 2  –   6 9) Transmission − Cable (CADTV): 01 ...
  • Page 89 Reference: TLM Communication Parameters (Cont.) 17. Channel Add/Delete (NTSC) (Command: m b) 20. Input select (Command: x b) To set the saved channel status. To select input source for main picture.  * Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00: Delete Data...
  • Page 90 Reference: TLM Communication Parameters (Cont.) Key Codes The following table provides key codes for a typical LG Installer Remote. Note: Some keys are not applicable to all models. Code Function Code Function (Hexa) (Hexa) PAGE (Green) PAGE (Red) (Yellow) (Blue)

  • Page 91: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4325...

  • Page 92: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU...

  • Page 93: Glossary Of Terms

    (Java or seems logical for customer tuning/viewing. HTML) application. Refers to a particular commercial mode of Cloning operation within an LG TV. See also FTG Pro:Idiom The process of capturing a Master TV Mode. Zenith proprietary security software that...

  • Page 94: Document Revision History / Open Source Software Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@ lge.com.

  • Page 95: Back Cover

    1-888-865-3026 www.lg.com/us/business Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and the “LG” logo are registered trademarks of LG Electronics Inc. b-LAN is a trademark of SONIFI Solutions, Inc. All other trademarks or registered trademarks are the property of their respective owners.

This manual is also suitable for:

49uv570h55uv570h65uv570h55uv572h

Table of Contents