1. Manuals
  2. Brands
  3. LG Manuals
  4. TV
  5. 65UV770H
  6. Setup manual

LG 65UV770H Setup Manual

Hide thumbs Also See for 65UV770H:
Table of Contents

Advertisement

Quick Links

Download this manual
© Copyright 2017 LG Electronics U.S.A., Inc.
Lodging Guest Interactive Pro:Centric 
Commercial Mode Setup Guide
Note: Selected features shown in this guide may not be available on all models.
43UV770H
49UV770H
55UV770H
65UV770H
EXPERIENCED INSTALLER
EZ-Manager Wizard
pages 16 – 25
Custom Master TV Setup
pages 41 – 43
Cloning Procedures
pages 44 – 50
P/N: 206-4323 (Rev A)
®
TVs

Advertisement

Table of Contents
loading

Related Manuals for LG 65UV770H

Summary of Contents for LG 65UV770H

  • Page 1 Note: Selected features shown in this guide may not be available on all models. EXPERIENCED INSTALLER EZ-Manager Wizard pages 16 – 25 Custom Master TV Setup pages 41 – 43 Cloning Procedures pages 44 – 50 P/N: 206-4323 (Rev A) © Copyright 2017 LG Electronics U.S.A., Inc.

  • Page 2: Safety Warnings

    • Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 16. Power Cord Caution: Check the TV specifications in the Owner’s Keep these instructions. Manual to determine power requirements. Heed all warnings. Periodically examine the cord of your appliance, and if its Follow all instructions. appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 26. Keep the product away from direct sunlight. (Continued from previous page) 27. When mounting a TV on the wall, make sure that none of the 21. Outdoor Antenna Grounding electrical cabling bears any of the weight of the TV. Install in If an outside antenna or cable system is connected to the accordance with the manufacturer’s instructions.

  • Page 5: Table Of Contents

    Table of Contents Safety Warnings ........2 Cloud Configuration Tool Overview .

  • Page 6: Commercial Mode Overview

    This document describes how to set up UV770H Pro:Centric  TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’s CPU, Protocol Translation Controller (PTC), or embedded b-LAN™ (EBL) module, or it resides in a Pro:Centric application or an external device from the solution provider.

  • Page 7: Ftg Mode

    Commercial Mode Overview (Cont.) Installer Menu To create a Master TV Setup, you will need to know how to access the PTC INSTALLER MENU commercial controller (PTC) Installer Menu and make changes to the xxUV770H default values as required. If necessary, familiarize yourself with the CPU - CTV Installer Menu and how to make and save changes.
  • Page 8 Wi-Fi Zoning options for location-specific configuration. Menu settings using one of the following processes: LG’s Cloud Configuration Tool enables you to create Note: In order to create an FMA Configuration (.fma) an FTG Configuration (.tlx) file, which may be used to file for these models that can be used for remote configure the CPU for FTG Mode.

  • Page 9: Application Tuning Mode / Pro:centric Direct

    Note: Physical channel tuning is not available when IP channels are included in the FTG Channel Map. While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only.

  • Page 10: Determining The Tv Operating Mode

    While the TV is in Application Tuning Mode: • Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items will be read-only. • While it is possible to update a TV’s Installer Menu and/or Setup Menu settings locally using a USB memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made...

  • Page 11: Pro:centric Operation

    Pro:Centric Operation These TV models support LG’s Pro:Centric Java application, as well as the Pro:Centric Direct HTML application. Only one application may be implemented at a time. The following sections provide an overview of the application features and functionality. Interactive Menu Features...
  • Page 12 Pro:Centric Operation (Cont.) Example: Pro:Centric Java Application Portal Example: Pro:Centric Direct HTML Application Portal 206-4323...

  • Page 13: Pro:centric Java Application Setup

    Pro:Centric Operation (Cont.) Pro:Centric Java Application Setup The Pro:Centric Java application operates in conjunction with FTG and PPV Modes. This section provides an overview of the setup required for the Pro:Centric features. Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide.

  • Page 14: Pro:centric Direct Html Application Setup

    Pro:Centric Operation (Cont.) TV in FTG Mode If the TV is already in FTG Mode (via CPU or EBL), use the appropriate FTG application to update Installer Menu items #98 Pro:Centric and #119 Data Channel (along with their affiliated fields). Then, transfer the FTG Installer Menu settings to the TV in accordance with the FTG Mode of configuration.
  • Page 15 Pro:Centric Operation (Cont.) TV in Pass-through Mode If the EZ-Manager Wizard has been exited and the TV is in Pass-through Mode, either: • Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values. See Installer Menu information on pages 30 to 40 for further details. Also, as necessary, refer to “Custom Master TV Setup”...

  • Page 16: Ez-Manager Wizard

    EZ-Manager Wizard Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the EZ-Manager Wizard to appear. The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated or manual) of configuring the essential Installer Menu items for Pro:Centric operation.

  • Page 17: Initiate Configuration Or Exit The Ez-Manager Wizard

    EZ-Manager Wizard (Cont.) Initiate Configuration or Exit the EZ-Manager Wizard The Welcome screen provides a brief introduction to the EZ-Manager Wizard. WELCOME TO THE EZ-MANAGER WIZARD Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation or to configure the TV using a USB memory device.

  • Page 18: Tv Configuration Options

    EZ-Manager Wizard (Cont.) TV Configuration Options From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature(s) on the TV for location-specific configuration purposes, select the “Zones &...
  • Page 19 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be configured using a “.tlx” file (local or remote configuration). ZONES, LABEL, AND ROOM NUMBER Wi-Fi Zone If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi <...

  • Page 20: Configure Pro:centric Settings

    EZ-Manager Wizard (Cont.) Configure Pro:Centric Settings Once you select “NEXT” from the TV Configuration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: Select the “BACK” button, where available, to check previous settings, as necessary. SEARCHING FOR PRO:CENTRIC SERVER... This step automatically searches for the Pro:Centric Server.
  • Page 21 EZ-Manager Wizard (Cont.) (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example, “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGUR...
  • Page 22 EZ-Manager Wizard (Cont.) Manual Pro:Centric Configuration 1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then press OK. In the Pro:Centric Manual Configuration screen (see examples below), you will be able to configure the appropriate Pro:Centric settings in the TV.
  • Page 23 EZ-Manager Wizard (Cont.) (Continued from previous page) RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel.

  • Page 24: Usb Configuration

    EZ-Manager Wizard (Cont.) (Continued from previous page) If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric Configuration screen example on page 21). When the Pro:Centric configuration is complete, an EZ-Manager Configuration Complete screen (see example on page 21) is displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
  • Page 25 EZ-Manager Wizard (Cont.) USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zones, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into either of the TV’s USB ports. 2.

  • Page 26: Ez Download Utility

    Ez Download Utility The Ez Download utility, available from the TV Manager, enables you to select multiple files at one time from the files loaded on a USB memory device. You may use this utility to download any one or all of the following to a TV: •...
  • Page 27 Ez Download Utility (Cont.) (Continued from previous page) • If the wizard is displayed, you can access the Ez Download utility via the wizard, as indicated above (see “Before You Begin”). However, to continue with this procedure and access the Ez Download utility from the TV menus, exit the EZ-Manager Wizard.
  • Page 28 Ez Download Utility (Cont.) (Continued from previous page) 6. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the file(s) you wish to use. If necessary, use the arrow keys on the Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and press OK.
  • Page 29 Ez Download Utility (Cont.) (Continued from previous page) 9. If a Clone/Configuration (.tlx) file that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner Display field will be displayed at the right of the screen. If the FTG Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose the format for the channel tuning/banner display.

  • Page 30: Installer Menu

    Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG Configuration (.tlx) file created using LG’s Cloud Configuration Tool or configuring the EBL locally (.rml) or remotely (via FMA-LG102 / .fma) using the FTG Device Configuration Application software.

  • Page 31: Navigating Within The Installer Menu

    Installer Menu (Cont.) As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current configuration mode. The table below lists all possible mode identifiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Lineup in CPU CPU-FTG FTG Mode via CPU...
  • Page 32 Installer Menu (Cont.) Installer Menu Items 000 through 071 Item Function Value Range Default Value Brief Description of Function INSTALLER SEQ 0 – 3 Leave default set to 0. Selects the number of hours of inactivity allowed before the TV automatically POWER MANAGE 0 –...
  • Page 33 Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function Value Range Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT CH NOT AVBLE 0 / 1 AVAILABLE”...

  • Page 34: Detailed Descriptions Of Installer Menu Items

    Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE 003 - BAND/AFC (Band/Automatic Frequency Control) Specifies entry sequence to the Installer Menu. There are four possible settings for this option: 0 = 9876 1 = 4321 0 = Broadcast 1 = CATV (default) 2 = 1478...
  • Page 35 Installer Menu (Cont.) 015 - SLEEP TIMER NOTE: For items 007, 008, and 009 If set to 1, the Sleep Timer feature may be used. If set to 0, the For legacy reasons, the scale used is 0 – 63. The PTC software Sleep Timer is not available.
  • Page 36 External Speaker (Optical/HDMI ARC) disable display panel rear Aux (AV) input. External Speaker (Optical/HDMI ARC) Disabled Enabled LG Sound Sync (Optical) 041 - SIMPLINK EN Disabled LG Sound Sync (Optical) Set to 0 to disable the SIMPLINK feature. Set to 1 to enable...
  • Page 37 Installer Menu (Cont.) 069 - EN. CH-T COL. (Enable Display Characters Custom Color) 081 - UPN LSB (UPN Least Significant Byte) Set to 1 to enable custom color for MPI display characters. Set to User programmable number, least significant byte readable by 0 to disable custom color for MPI display characters.
  • Page 38 If set to 0 (default), the TV’s MMR (Magic Motion Remote) feature Speaker Output Fixed 0.01 Watts is enabled, and a compatible LG MMR (not supplied) may be used with the TV. If set to 2, the MMR feature is disabled. Fixed 0.03 Watts Fixed 0.05 Watts...
  • Page 39 Installer Menu (Cont.) 117 - FACT DEFAULT (Factory Default) Note: The Data Channel is automatically set to “253” if Media Set to 1 and press OK to restore the factory default settings of all Type is set to “IP” either in the EZ-Manager Wizard or in the IP Installer Menu items.
  • Page 40 Installer Menu (Cont.) Note: This item is not available in the Installer Menu when item 119 DATA CHANNEL is set to 0, except when item 002 AC ON is set to 2 or 3 for Instant ON. Note: The TV clock must be set in order for a Wake For Update event to occur at the precise time of day in accordance with item 121 and item 122 settings.

  • Page 41: Custom Master Tv Setup

    Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed via USB memory device / “.tlx” file. The Master TV Setup may be exported to a Clone (.tlx) file, which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode.

  • Page 42: Custom Master Tv Setup Procedure

    Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. Turn ON the TV. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, the TV is in the required factory default state. Exit the wizard, and then continue with step 2.
  • Page 43 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV. Press MENU PICTURE SETTINGS on the Installer Remote, and select the All Settings Picture menu icon from the Quick Settings Menu to access the advanced TV setup menus.

  • Page 44: Cloning Procedures

    Cloning Procedures Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target TV using a USB memory device / Clone (.tlx) file. You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then use the Import Clone File procedure to transfer the configuration to Target TVs.
  • Page 45 Cloning Procedures (Cont.) (Continued from previous page) 5. Use the arrow navigation keys to select/highlight either the General menu icon from the TV setup menus or the Safety menu icon from the Function Menu. Then, press the number “7” key a total of seven times to access the TV Manager.

  • Page 46: Importing A Clone File

    Cloning Procedures (Continued from previous page) TV MANAGER Export Clone File USB DEVICE USB 1: Device Name Ez Download Select the filename, and then select EXPORT below. Logo Image Download Insert Background Image(s) xxUV770H-UA_1.TLX Update TV Software Update PTC Software Import Clone File Export Clone File Diagnostics EXPORT...
  • Page 47 Cloning Procedures (Cont.) • Avoid using special characters, such as ?, &, @, etc., in the Clone/Configuration (.tlx) filename. • If the EZ-Manager Wizard appears on the screen when you turn ON the Target TV, you can use the wizard’s “USB Configuration” option to access the TV Manager and complete the import procedure (see “TV Configuration Options”...
  • Page 48 Cloning Procedures (Cont.) Import Clone File Procedure 1. Turn ON the Target TV. 2. The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the TV: • If the wizard is displayed, you can complete the import procedure via the wizard, as indicated above (see “Before You Begin”).
  • Page 49 Cloning Procedures (Cont.) (Continued from previous page) 8. If more than one USB memory device is currently connected to the TV, be sure to select the USB device that contains the “.tlx” file you wish to use. If necessary, use the arrow keys on the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the screen and press OK.
  • Page 50 Cloning Procedures (Cont.) (Continued from previous page) 12. When you are ready to continue, select UPDATE on the screen and then press OK on the Installer Remote. Import progress will be displayed on the screen. This process may take a few minutes. Do NOT remove the USB device while importing is in progress.

  • Page 51: Cloud Configuration Tool Overview

    IN FTG MODE, THE CPU CANNOT BE SWITCHED TO FTG MODE. This section provides an overview of LG’s Cloud Configuration Tool web application, which is used for FTG Mode via CPU configuration. For best results, it is recommended that you access the Cloud Configuration ®...
  • Page 52 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) • If you are creating an FTG Configuration file from scratch and this is your first time using the Cloud Configuration Tool, you may wish to select the wizard setup, which will guide you through the essential steps of creating the file—building the Channel Map and/or the Installer Menu profile(s).
  • Page 53 Cloud Configuration Tool Overview (Cont.) (Continued from previous page) 3. If you need to edit the FTG Channel Map from an existing file (see previous step) or create a new FTG Channel Map, click on CHANNEL MAP in the menu options bar at the top left of the screen, and edit/create the FTG Channel Map in the Channel Map web page.

  • Page 54: File Manager Web Page Overview

    Cloud Configuration Tool Overview (Cont.) File Manager Web Page Overview The File Manager page (displayed after you select ADVANCED SETUP from the Welcome page) enables you to compile, modify, and save (export) FTG Configuration (.tlx) files. The screen example below provides an overview reference of the functions available on the File Manager page. Data contained in uploaded FTG Data to be saved in the FTG Configuration (.tlx) file.

  • Page 55: Channel Map Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Channel Map Web Page Overview On the Channel Map page, you can create, view, and edit a Logical Channel Map. Click the appropriate button to Search for existing channels or add a new RF or IP channel to clear the FTG Channel Map.

  • Page 56: Installer Menu Web Page Overview

    Cloud Configuration Tool Overview (Cont.) Installer Menu Web Page Overview Load default Installer Menu for selected model. Assign TV Zone as applicable. Once you click (Advanced Setup only) Cloud CREATE PROFILE, this Installer Menu profile will be Configuration Tool menu bar listed under Installer Menu Profile List, and Installer provides access to all utilities.

  • Page 57: Ip Environment Setup

    Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 41 to 43), all IP Environment settings, with the exception of Wired Network Connection settings, LG Connect settings, the TV name (editable in the Media Share Menu), DIAL settings, and SoftAP settings, may be cloned.
  • Page 58 IP Environment Setup (Cont.) Configuring a Wired Network Connection Note: If desired, you can configure both wired and wireless NETWORK SETT... connections. However, note that a wired connection is always prioritized over a wireless connection. That is, when the TV is Network Network / turned OFF and then back ON, if a LAN cable is detected between...
  • Page 59 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully, a “Connected to Internet” message will appear just below the progress display. If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling and/or verify the configuration data, as necessary.
  • Page 60 1. With the Network Menu on display, use the arrow keys on the Installer Remote to select LG Connect. Then, press OK. LG CONNECT 2. To turn LG Control ON or OFF, use the Up/Down arrow keys on Network Network / the Installer Remote to select/highlight the ON/OFF toggle button at the top right of the screen.

  • Page 61: Pro:centric Setup

    IP Environment Setup (Cont.) (Continued from previous page) If you are modifying the IGMP version, use the Up/Down arrow keys to select the appropriate version number from the drop-down list of options, and then, press OK. 4. Once all modifications are completed as required, use the arrow keys on the Installer Remote to return to the IP Environment Menu, as necessary, or press to return to the Network Menu and/or exit the...
  • Page 62 IP Environment Setup (Cont.) (Continued from previous page) 3. Refer to the appropriate subsection(s) below to configure the TV’s Pro:Centric settings to match those of the Pro:Centric server. PRO:CENTRIC While the Pro:Centric application itself is an additional feature (see Network step 4), the appropriate Pro:Centric server configuration must be completed to enable TV E-Z Installation (splash screen, configuration, Pro:Centric...
  • Page 63 IP Environment Setup (Cont.) (Continued from previous page) a) The Server Address field provides the option to specify the domain name of the Pro:Centric server instead of the server’s IP address. Select/highlight the Server Address field and press OK on the Installer Remote. Then, use the Up/Down arrow keys to select either IP Address or Domain Name from the drop-down list of options for defining the server.

  • Page 64: Media Share Setup

    : Allows guests to use the TV to access and view Network ® data shared either by wired DLNA Certified devices connected to the same LAN as the TV or by wireless LG devices using LG’s Pro:Centric ® Smart Share application with Wi-Fi Direct Smart Share Disable ®...
  • Page 65 IP Environment Setup (Cont.) (Continued from previous page) • To enable use of a randomly generated security key for SoftAP access, set the Use Default field to “Enable” (the Security Key field will subsequently be grayed out and the random security key will be displayed).

  • Page 66: Pre-Loaded Applications

    IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’s Smart Launcher, which appears along the PRE-LOADED... bottom of the screen. Network When the Pro:Centric application is disabled, the Smart Launcher is available to end users via the PORTAL button on the remote control.

  • Page 67: Updating Tv/Ptc Software Using A Usb Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager “Update TV Software” and/or “Update PTC Software” option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See “Ez Download Utility” on pages 26 to 29 for further information.

  • Page 68: Memory Device

    Reference: Updating TV/PTC Software using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)
  • Page 69 Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager “Logo Image Download” option, though you may also use the Ez Download utility to download the splash screen image, if desired.
  • Page 70 Reference: Downloading a Splash Screen Image using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s)
  • Page 71 Reference: Downloading Background Images using a USB Memory Device Background images are intended for use with audio-only channels and the Bluetooth Sound Sync feature. Guests may choose to display a slideshow on the screen (as opposed to a blank screen or the Bluetooth Sound Sync screen) while audio is playing.
  • Page 72 Reference: Downloading Background Images using a USB Memory Device (Cont.) (Continued from previous page) TV MANAGER Ez Download USB DEVICE USB 1: Device Name Ez Download Select the file(s) to download, and then select UPDATE below. Logo Image Download Logo Image Download Splash Image ProC.jpg Insert Background Image(s) Insert Background Image(s)

  • Page 73: Power Consumption Settings

    Reference: Power Consumption Settings The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). 43UV770H 49UV770H 55UV770H 65UV770H Item 099 Back Power Power Power Power Percent Percent Percent Percent Lighting...

  • Page 74: Tv Aux Input Configuration

    Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA STATUS DIRECT ACCESS STATUS TYPE TYPE 0xD2 TYPE 0x0D Tuning Installer Installer Menu 0x41 SOURCES CURRENT AV Menu Item ENABLED (R/W) SOURCE (R) SOURCE (R) 046 START AUX SRCE Installer Installer...

  • Page 75: B-Lan Setup & Overview

    3 (default) A b-LAN enabled head end device, such as an LG FMA-LG102, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b-LAN module to receive communication from the head end device.

  • Page 76: Ftg Mode Via Ebl (Local Configuration)

    (EBL) connection. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Configuration Application software is available online at: www.lg.com/us/business/display-solutions/ftg. Note: If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings.
  • Page 77 Reference: FTG Mode via EBL (Local Configuration) (Cont.) (Continued from previous page) 5. “Write” the FTG Channel Map to the EBL (switches the EBL from Pass-through Mode to FTG Mode). Note: After a “Write” of new data, the TV will briefly display a green text banner that shows the EBL firmware version and release date.

  • Page 78: Auto Input(S) Sensing Feature

    Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available Aux inputs, set item 042 to 255. For specifications on all other available settings (i.e., settings for individual inputs), refer to the Aux Inputs Values table on the following page.
  • Page 79 Reference: Auto Input(s) Sensing Feature (Cont.) The following table shows all available Aux inputs as if each is enabled in the Installer Menu. The Installer Menu text codes for item 042 will be altered accordingly if any of the available Aux inputs are disabled in the Installer Menu.

  • Page 80: Restoring Factory Defaults On The Tv(S)

    This section describes how to restore a single TV, regardless of its mode, to a factory default condition. The following procedure requires that you contact LG technical support to obtain a predefined value/ password for Installer Menu item 117 FACT DEFAULT that enables access to initiate a factory “IN-STOP”...

  • Page 81: Using The Tv's Zoning Features

    Reference: Using the TV’s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the UV770H model TVs. These features are primarily intended for use when the TV is configured for FTG Mode operation; however, Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and Setup Menu profile Zone assignments), may also be used with TV cloning processes using a USB memory device / “.tlx”...
  • Page 82 Reference: Using the TV’s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the Channel Map web page overview on page 55. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
  • Page 83 Reference: Using the TV’s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Configuration A location-specific Wi-Fi configuration / Clone (.tlx) file may be saved (exported) from a Master TV and then be used to configure Target TVs. First, the wireless network (i.e., the access point login data) must be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network Connection”...
  • Page 84 Reference: Using the TV’s Zoning Features (Cont.) (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV. Select/highlight the Label field and press OK. Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are finished.

  • Page 85: Using Media Share Features

    Smart Share with Wi-Fi Direct The following steps describe how to access and use Wi-Fi Direct (i.e., to connect to a wireless LG device). Remember that you must also turn ON Wi-Fi Direct and launch the Smart Share application on the LG device.
  • Page 86 GENERAL WI-FI DIRECT Picture Picture General / REFRESH LIST Sound Sound Language [TV]LG Smart TV Note: The example at left Room Info shows the General Menu when Channels Channels Time & Date the TV is in Pass-through Mode. Timers The Wi-Fi Direct screen is the...
  • Page 87 Reference: Using Media Share Features (Cont.) Screen Share (Miracast / WiDi) The following steps describe how to access and use the Miracast / WiDi features. Note: This procedure describes how to access Screen Share from the TV’s Smart Launcher. If the TV is not in Pass-through Mode, it is also possible to access Screen Share from the TV’s General Menu.
  • Page 88 Reference: Using Media Share Features (Cont.) (Continued from previous page) 3. When you initially access the Wi-Fi Service screen, the OFF/ON toggle button at the top right of the screen is selected/highlighted by default. If Wi-Fi Service is currently OFF, press OK on the Installer Remote to turn Wi-Fi Service ON.

  • Page 89: Uv770H Rear And Side Jack Panels

    Reference: UV770H Rear and Side Jack Panels SPEAKER OUT / LINE OUT AUX LAN & LAN (3.5 mm jack) Connect external audio (fixed Use for video IP and/or network speaker, variable speaker, or fixed line level connections. [amplifier]) equipment. See also Reference section, “External Stereo Speaker Specifications.”...

  • Page 90: External Stereo Speaker Specifications

    Reference: External Stereo Speaker Specifications The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the UV770H rear panel provides stereo speaker signal outputs (fixed speaker, variable speaker, or fixed line level [amplifier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected to the TV.

  • Page 91: Installer Remote Control Typical Key Functions

    Reference: Installer Remote Control Typical Key Functions The LG Installer Remote is supplied with and dedicated to operate the TV. The LG Installer Remote illustrated below shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

  • Page 92: Troubleshooting

    If applicable, connect MPI cable to MPI device. Weak batteries. Replace batteries. Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible LG Installer Remote. Contact your LG representative. 206-4323...

  • Page 93: Commercial Mode Check / Ftg Operation Troubleshooting

    Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Use this flowchart to determine whether the TV is currently in Commercial Mode. Press POWER on Installer Remote. connected Plug into AC TV turned to AC Power outlet. Power? Leave the TV set ON, and press MENU...

  • Page 94: Glossary Of Terms

    (Java or seems logical for customer tuning/viewing. HTML) application. Refers to a particular commercial mode of Cloning operation within an LG TV. See also FTG Pro:Idiom The process of capturing a Master TV Mode. Zenith proprietary security software that...

  • Page 95: Notice

    In addition to the source code, all referenced license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon e-mail request to opensource@ lge.com.

  • Page 96: Back Cover

    Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric, Smart Share, and the “LG” logo are registered trademarks of LG Electronics Inc. DLNA Certified is a registered trademark of Digital Living Network Alliance. Intel is a registered trademark of Intel Corporation in the U.S.

This manual is also suitable for:

43uv770h49uv770h55uv770h

Table of Contents