Kobalt KMH 1024-03 Manual page 37

SAFETY INFORMATION
Some of the following symbols may be used on this tool. Please study them and their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL DEFINITION
V Volts
Direct current
A danger, warning, or caution.
It means 'Attention! Your safety
is involved.'
Wear eye, ear and head
protection.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
• When using electric trimmers, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
DANGER
• Do not rely on the tool's insulation against electric shock. To reduce the risk of
electrocution, never operate the tool in the vicinity of any wires or cables which may
carry electric current.
Grass Trimmer Safety Warnings
• Do not use the machine in bad weather conditions, especially when there is a risk of
lightning. This decreases the risk of being struck by lightning.
• Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may
be injured by the machine during operation.
• Thoroughly inspect the area where the machine is to be used and remove all stones,
sticks, wires, bones, and other foreign objects. Thrown objects can cause personal
injury.
• Before using the machine, always visually inspect to see that the cutter or blade and
the cutter or blade assembly are not damaged. Damaged parts increase the risk of injury.
• Follow instructions for changing accessories. Improperly tightened blade securing nuts
or bolts may either damage the blade or result in it becoming detached.
• Wear eye, ear, head and hand protection. Adequate protective equipment will reduce
personal injury by flying debris or accidental contact with the cutting line or blade.
• While operating the machine, always wear non-slip and protective footwear. Do not
operate the machine when barefoot or wearing open sandals. This reduces the chance
of injury to the feet from contact with the moving cutters or lines.
SYMBOL DEFINITION
n No-load speed
0
RPM Revolutions per Minute
To reduce the risk of injury, user
must read instruction manual.
Do not expose to rain.
5