Related Manuals for Tesup HERAWindPro
Summary of Contents for Tesup HERAWindPro
- Page 1 Designed in California Assembled in “WIND POWER NOW AT London YOUR DOORSTEP.” HERAWindPro Vertical Axis Wind Turbine USER MANUAL...
-
Page 2: Table Of Contents
10.2 INSPECTION & MAINTENANCE SCHEDULE 10.3 MAINTENANCE & CLEANING BY THE USER 11. REMOVAL FROM SERVICE & DISPOSAL 11.1 FINAL DECOMISSIONING OF WIND TURBINE 11.2 DISPOSAL OF THE SYSTEM & COMPONENTS TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 3: General
• Place this instruction manual in a safe place for reference. • TESUP Wind Turbines can only be used with TESUP Charge Controllers and TESUP selling Inverters. • There has to be constant load consumption for the wind turbine system (wind turbine, charge controller and inverter) to work smoothly without stopping and heating. -
Page 4: Symbols Used
DANGER: Immediate danger can cause serious injury. WARNING: Potential Danger, can cause Serious injury. CAUTION: Potential Danger, can cause moderate injury. NOTE: Useful Tips OTHER SIGNS USED: GENERAL WARNING HIGH VOLTAGE MAY START WITHOUT WARNING ENVIORNMENTAL HAZARD TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 5: Warranty Details
TESUP Limited Warranty does not cover any part that was not manufactured by TESUP, nor does it cover the costs of any repairs or adjustments to your Wind Turbine that might be needed because of the use of non-HERA Wind Pro parts, components, equipment, or materials. -
Page 6: Technical Description
• All modifications or changes to the wind turbine system without the manufacturer’s written approval. • Use of parts other than HERA Wind Pro original parts. • Operation in non-approved SWTS classes. • Operation in strong winds or hurricanes. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 7: System Components
3. Technical Description HERA WIND PRO USER MANUAL 3.3 SYSTEM COMPONENTS CHARGE CONTROLLER INVERTER HERA Wind Pro TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 8: Wind Turbine Components
3. Technical Description HERA WIND PRO USER MANUAL 3.4 WIND TURBINE COMPONENTS Top Flange (x1) Blades (x2) Rotor Shaft (x1) Bottom Flange (x1) Turbine Body (x1) Mounting Base (x1) TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 9: Parameter & Dimensions
Starting Wind Speed 4m/s (3m/s afterwards) No. Of Blades Max Rpm Max Speed 50m/s Noise 35 dB WARNING: If a hurricane scale III (50–58 m/s) or above occurs, please cover wind turbine blades. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 10: Power Curve
4. Parameter & Dimensions HERA WIND PRO USER MANUAL 4.2 POWER CURVE IMPORTANT: Humidity and the ion levels in the air can impact your turbine’s performance. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 11: General Arrangement
4. Parameter & Dimensions HERA WIND PRO USER MANUAL 4.3 GENERAL ARRANGEMENT TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 12: Charge Controller
5. Charge Controller HERA WIND PRO USER MANUAL 5.1 TECHNICAL DETAILS The Wind Turbine Charge Controller from TESUP is an intelligent controller which controls the wind turbine. It safely and efficiently charges and control your battery with the wind generator combination. -
Page 13: Wiring Diagram
5. Charge Controller HERA WIND PRO USER MANUAL 5.2 WIRING DIAGRAM Wiring Diagram: ON GRID SYSTEMS TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... - Page 14 5. Charge Controller HERA WIND PRO USER MANUAL 5.2 WIRING DIAGRAM Wiring Diagram: ON GRID SYSTEMS WITH PV TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com...
- Page 15 5. Charge Controller HERA WIND PRO USER MANUAL 5.2 WIRING DIAGRAM Wiring Diagram: OFF - GRID SYSTEMS TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com...
-
Page 16: Storage & Operation
The TESUP Charge Controller can adjust and limit the output voltage level between 0 to 75 volts. If the inverter option is selected using the button on the TESUP charge controller, there is no maximum voltage limitation. Stickers warning of electrical danger are on our products. We do not take any responsibility for health risks associated with the use of electricity. -
Page 17: Safety Information
Repair Manufacturer WARNING: Never open the turbine body and expose the generator unless you are instructed to do so by a TESUP engineer. Opening the turbine body and modifications to the turbine system will void your warranty. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 18: Important Safety Instructions
- Fire Resistant Cables Only - OUTDOOR USE ONLY IMPORTANT: To make the system operational TESUP Wind Turbine, TESUP Charge Controller and TESUP selling grid inverter are all required. All to be installed outdoors. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 19: Pre-Use Preperation
The wind turbine system may only be operated up to Class III wind sites. IMPORTANT: When choosing the place of use, make sure adequate room is available to tilt the tower and blades TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 20: Mounting Details
NOTE: Use of M10 hex bolts or Anchor Fasteners recommended. WARNING: The mounting base must be fixed to the mounting surface and checked that it is fully stable before moving on to the next steps with wind turbine installation. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 21: Unpacking The Components
IMPORTANT: Make sure the 3-phase AC cable at the wind turbine output is not short-circuited. If there is a short circuit, the turbine will brake itself and the blades will be prevented from turning. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... - Page 22 - OUTDOOR USE ONLY IMPORTANT: To make the system operational TESUP Wind Turbine, TESUP Charge Controller and TESUP selling grid inverter are all required. All to be installed outdoors. WARNING: The mounting base of the wind turbine must be fixed to the mounting surface and checked that it is fully stable, before moving on to the next steps with wind turbine installation.
- Page 23 7. Pre-use Preperation HERA WIND PRO USER MANUAL 4 min 1 min 2 mins 2 mins 2 mins TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com...
- Page 24 HERA WIND PRO USER MANUAL 4 mins 4 mins WARNING: Wrong or loose fastening can affect the efficiency of your turbine, damage your turbine and cause injuries. Make sure all the fasteners are tightened properly. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com...
-
Page 25: Electrical Connections
WARNING: All work on electrical equipment must be carried out by a qualified electrician with the power switched off! NOTE: To ensure proper operation, you must use an original TESUP charge controller. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 26: Regular Operation
8. Regular Operation HERA WIND PRO USER MANUAL 8.1 SWITCHING ON THE WIND TURBINE SYSTEM • Unlock the emergency stop button or release the brake button on the TESUP charge controller. • The brake is released. • The fast-blinking red LED on the TESUP charge controller goes out. -
Page 27: Shutting Down Wind Turbine
This type of shutdown can occur during the stormy weather when the wind speed is higher than 27 m/s. If this is the case, cover your blades. 9.3 AUTOMATIC BRAKE Automatic brake function on the TESUP Charge Controller securely slows down and controls the wind turbine’s fast acceleration. To activate the auto-brake function; •... -
Page 28: Maintenance
- Take steps to prevent the wind turbine system from being switched on again by unauthorized persons. WARNING: Shut down the wind turbine system immediately if the rotor blades or the electrical wiring are damaged or there is an unusual vibration. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 29: Maintenance & Cleaning By The User
Coat the wind turbine and the rotor blades regularly with commercially available wax. NOTE: A wax film protects the surfaces of the wind turbine and the rotor blades from the weather and increases the efficiency of the blades. TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... -
Page 30: Removal From Service & Disposal
WARNING: Risk of injury and possible breakage due to unqualified dismantling, e.g. persons without suitable training. The system must be dismantled in the proper way by a suitably qualified person. CAUTION: Stored energy TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com... - Page 31 World`s Biggest Household Wind Turbine and Flexible Solar Panel Manufacturer BECOME ENERGY INDEPENDANT TODAY Need help? Book one-to-one consultancy or a free lecture on www.tesup.com TESUP ELECTRONICS LTD. HEADQUARTERS 22 Sutton Lane, North Chiswick London W4 4LD United Kingdom...
Need help?
Do you have a question about the HERAWindPro and is the answer not in the manual?
Questions and answers