Installation
For questions or help regarding installation, call customer service at 1-315-452-7400 or
email
info@wineguardian.com
installed.
Pre-Installation
Test the system before installing it to check for non-visible shipping damage.
✓ Set the system on the floor or a sturdy level surface.
✓ Plug in the system.
✓ Press the on/off switch and check that the control illuminates. This indicates the
system has power.
✓ The built-in timer prevents short cycling and keeps the system from turning on
right away.
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
SHARP EDGES ARE PRESENT INSIDE THE WINE GUARDIAN SYSTEM
Pre-Installation Planning
Prior to installation determine how best to mount the unit.
Floor Mounting - Mount the Wine Guardian fan coil on the floor but elevate it 4" (10cm)
as a minimum on a frame with a plywood surface to keep it away from water. Allow
adequate space for the external drain.
Fig. 1
Wall Mounting - If the unit is to be surface mounted on the wall, adequately support it
on both sides of the wall. Use floor or knee braces to transfer the load of the unit to
the floor or wall.
a sketch of the proposed area where the unit is to be
22