Abbott NeuroSphere 3875 User Manual page 45

NOTE: Contact your clinician before receiving an MRI
scan to find out if you can undergo the procedure and to
learn more about any risks.
You have two ways to learn if the implanted parts of
your system are MR Conditional:
▪ ▪
Your personal identification card, which your
clinician or MRI technologist will use
▪ ▪
Your patient controller app
– – – Tap
of the screen displays the message "System is MR
Conditional" if implanted parts of your system are
approved MR Conditional models.
– Tap – – Mode
Mode screen. The MRI Mode option is available if
implanted parts of your system are approved MR
Conditional models.
Preparing for an MRI Scan
If you have an MR Conditional system and will receive
an MRI scan, follow these guidelines:
▪ ▪
Set your IPG to MRI mode within a day before you
arrive for your procedure. See "Setting the IPG to
MRI Mode" (page 42) for instructions.
▪ ▪
Charge your patient controller before the
procedure.
to display the system information. The top
on the Therapy screen to display the
41