Audio; Test Tone; Distance; Night Mode - RCA RTD258 User Manual

The Setup Menu
EN
1. Highlight a distance option using the up/down arrow buttons.
• Subwoofer (Sub Dist.)
• Rear (SR Dist.)
• Rear (SL Dist.)
• Front (FR Dist.)
• Center (Cen Dist.)
• Front (FL Dist.)
2. Press the left/right arrow buttons to adjust the distance.
Note: The receiver speaker distance default settings are as follows:
Subwoofer (Sub Dist.): 0ft; Rear (SR Dist.): 10ft; Rear (SL Dist.): 10ft; Front (FR Dist.): 15ft; Center (Cen Dist.): 15 ft;
Front (FL Dist.): 15ft.

Night Mode

You can use this function to control the different sound levels via dynamic compression. It improves
the quality of the sound track at a low volume, and quiets the loudest sounds. You can choose
between Quiet, Moderate or Off.
Note: This function is available only on DVD discs recorded in Dolby Digital.
Front Surround Sound Effect (FSsE)
You can use this function if placing the rear speakers (surround speakers) at the back is not a good
choice for you. See page 8-10 for speaker configuration.
You can use this function to control different levels of surround sound. You can select among
SMALL, MID, LARGE and OFF according to your room size:
SMALL: room size below 12ft x 12 ft (3.6m x 3.6m)
MID: room size between 12ft x 12ft - 16 ft x 16 ft (5m x 5m)
LARGE: room size over 16ft x 16ft
26
Illustrations contained in this document are for representation only.

Audio

You can adapt your player to other equipment and access
specific functions with the Audio menu.
1. Select Audio in the main menu using the left/right arrow
buttons.
2. Select an option using the up/down arrow buttons and press
OK.

Test Tone

This function is used to test the speaker setting. A short noise
comes from the respective speaker.

Distance

Basic settings have been preset for the speakers included with
your unit. However, to suit the acoustic conditions in your
listening room and to make the sound more effective, you may
need to delay the signal coming from some of the speakers.
Channel delay compensates for center or surround speakers
that are closer to the listening position than the front
speakers.

Rating

The disc publisher is responsible for coding scenes according to
the rating limits. Below is an
explanation of Ratings.
You can control access to the player and the type of discs your
family can watch with the lock function. Locking the player
prevents playback of DVDs that may not be suitable for all
audiences by using the rating level encoded on the disc (not all
discs are rated). If the rating level of the disc is higher than the
preset level, playback is prohibited unless a password is
entered.