RT2300-rev.1 7/27/99 7:01 PM Page 11
Getting Started
GB
Connecting for power
Make sure you connect all your other electronic components and the
speakers before plugging your receiver into the outlet.
Plug the power cord in the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
Using Headphones
To listen privately through your audio system, use the PHONES jack on the
receiver. However, make sure you turn down the volume before you put on
the headphones. Increase the volume to the desired level after headphones
are in place.
Demo Mode
Right after you plugged in the power, a demo message will be appeared in
display. (For more information please refer to section "Demo Mode" in
"Advanced Sound Control" on page 14.)
Restore to Factory Settings
You can always restore all settings back to original state. When the receiver is in Standby
mode, press in turn
CONCERT
OFF
NIGHT
CHURCH
ARENA
THEATER
then you can restore everything like preset radio station frequencies, speaker settings,
back to the first time you use it.
8