Index Search - RCA DRC6300N User Manual

5
No displays will appear (useful
for dubbing)

Index Search

The VCR has a VHS Index Search System that automatically records index marks
on the tape every time you start a recording. During playback you can locate the
program you want to play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are at on the tape.
To Activate Index Search:
1. While playing back, press the STOP button to stop the tape.
2. Press the SEARCH button on the remote control.
3. If you want to search through a certain number of index marks, press two
number buttons to enter the number of marks you want to search.
4. Press the FORWARD button to search forward or REVERSE to search in reverse.
The VCR will locate your index mark and begin playback. If you did not enter
a specific index number, the VCR will locate the next index mark and begin
playback.
5. Press STOP to stop Index Search.
Notes: Certain index marks may be missed by the VCR including:
• Marks too close to the current location of the tape.
• Those at the beginning of a recording lasting five minutes or less.
• Index marks that start at the beginning of the tape.
Chapter 4
5. Press the INFO button again to have no displays appear
on the TV screen. The current time is displayed in the
DVD/VCR's display panel.
Note: Turning off the DVD/VCR player also resets the displays.
VCR Features
31