Chapter 2: Using the Remote Control
Button Descriptions for DVD and VCR Modes
In addition to operating your DVD/VCR, the remote that came with it will operate most RCA, GE, and
Proscan TVs. However, this section only describes the buttons on the remote that you will use with your
DVD/VCR.
For descriptions of remote control buttons to be used with your TV (RCA, GE, and Proscan only), go to
the next page.
DVD
VCR
TV
G O B A C K
VOL
MUTE
RETU R N
CLEAR
AU DIO
LOC K
SUBTIT LE
TIMER
GUIDE
INFO
1
2
4
5
7
8
INPUT
0
REVERSE
PLAY
RECOR D
STOP
AGAIN
ZO OM
S PE ED
SEARCH
14
Graphics contained within this publication are for representation only.
DVD and VCR function buttons listed alphabetically
(0-9) Number buttons Use to input information such as
ON
•
OF F
chapter numbers, track numbers, or to make selections on
some menu screens. In VCR mode, enter channel numbers.
AGAIN Quick reverse - replays the last few seconds of a DVD
movie.
CH
ANGLE Accesses the Camera Angle icon of DVD disc Info
Display.
Arrow buttons Use the arrows to navigate through the
menu screens and make selections.
MEN U
AUDIO Accesses the Audio icon in the Info Display that
enables you to play a disc in a different language.
CH+/- In VCR mode, selects next higher or lower channel in
the channel list and adjusts tracking. In DVD mode, selects
ANGLE
the next/preceding chapter or track when playing a disc.
TIT LE
CLEAR In VCR mode, resets the time counter.
3
DVD Turns on the DVD/VCR and puts the remote in DVD
6
mode. Likewise, you can change to the VCR mode by pressing
the VCR button.
9
FORWARD Fast forwards the tape when the VCR is in stop
PLAY MODE
mode. In DVD and VCR mode, searches forward if pressed
TV
•
VCR
during playback. In DVD mode, during play-pause mode, this
FORWAR D
button starts slow-motion advance and each press of the
button during slow-motion advance increases the speed
PAUSE
incrementally.
OPEN
•
CLOSE
GO BACK/RETURN Goes back to the previous menu.
INFO Shows the status displays on screen of your RCA, GE, or
Proscan TV, or DVD/VCR (whichever component the remote is
set to control). Displays the on-screen Info Display when
playing DVD discs.
INPUT In VCR or TV mode, selects between the Video Input
Channels and the tuner. Video Input Channel refers to the
signal coming from the component connected to audio/
video input jacks on the DVD/VCR or TV.
Chapter 2