Time Counter - RCA DRC6300N User Manual

CLOCK
PROGRAM
TUNING
SETUP
SELECT
PROGRAM 1
TO EXIT PRESS
MONTH
DAY
START
STOP
CHANNEL : 4 TV
SPEED
REPEAT : ONCE
TO ERASE PRESS
TO EXIT PRESS

Time Counter

The time counter shows the actual time used when recording or playing a tape. The time counter helps
locate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected from
the DVD/VCR.
For example, if you record a 30–minute program at the beginning of a tape, rewind it, and then want
to go to the end of the first program to start another recording:
Hours
0:30:00
Chapter 4
Reviewing and Clearing Programs
To review programs that you have already set up:
1. Press the MENU button to display the VCR Main Menu.
2. Press the down arrow button until PROGRAM is
3. Use the left and right arrow buttons to choose the
ENTER
: JULY
• To erase a program, press CLEAR.
: 6 FRI
: 6:00 PM
: 7:30 PM
: SP
1. Press the INFO button three times to display only the
2. Press the CLEAR button to reset the time counter to
3. Press the remote control's FORWARD button to advance
Minutes
4. Press the STOP button. This is the approximate end of a
Seconds
5. Press the INFO button to remove the time counter from
highlighted, and press OK (the Program menu appears).
program number you want to check or clear (1-8).
time counter.
0:00:00.
a tape until the time counter reads 0:30:00.
30-minute program (you may want to press the PLAY
button to verify). When the tape is cued correctly, you
can begin recording.
the screen and return to the normal display mode.
VCR Features
29